Poisonous Substances Fluorinated Polymer Control Valve

China Poisonous Substances Fluorinated Polymer Control Valve, Find details about China Control Valve Cost, A/C Control Valve Tester from Poisonous Substances Fluorinated Polymer Control Valve

Model NO.
ZJHPF
Material
Stainless Steel
Type
Sleeve
Trademark
HUIZHENG
Transport Package
Plywood Case
Specification
DN50-DN600
Origin
China
HS Code
8481804090
Model NO.
ZJHPF
Material
Stainless Steel
Type
Sleeve
Trademark
HUIZHENG
Transport Package
Plywood Case
Specification
DN50-DN600
Origin
China
HS Code
8481804090
Poisonous Substances Fluorinated Polymer Control Valve

Poisonous Substances Fluorinated Polymer Control Valve
Product Introduction


ZJHPF pneumatic diaphragm PTFE control valve is a kind of anti-corrosion straight-through single-seat control valve. The inside wall of body and trim which contact with fluid adopts high-pressure injection molding process to lined with corrosion and aging resistance polyperfluoroethylene propylene(F46) and sealed with PTFE bellows.
The pneumatic diaphragm control valve is widely used in the acid, alkali, poisonous and volatile gases and liquids.


Technical Parameters
 
Body typeStraight type casting body
Nominal diameter3/4", 20, 25, 32, 40, 50, 65, 80, 100, 150mm
Nominal pressurePN 1.6 MPa
Flange standardJB/T79·1~79·2-94
MaterialZG230-450 lined with F46
Working temperature-40~180ºC
Gland typeBolted compression type
PackingV type PTFE
Spool typSingle-seat plunger spool
Flow characteristicsLinear or equal percentage
Seat and spool material2Cr13 lined with F46

Feature
 

1. Corrosion resistance. Almost able to withstand the corrosion of all media (including concentrated nitric acid and aqua regia).
2. Good sealing performance. Double sealing with bellows and packing to ensure no leakage.
3. The leakage is small. Because the valve core and valve seat adopt soft sealing, it is ensured that there is no leakage.
4. Equipped with HA actuator, with large output force and compact structure.


Actuator
Poisonous Substances Fluorinated Polymer Control Valve

Actuator type: ZHA (B) multi-spring diaphragm actuator
Diaphragm material: Bing rubber clamped nylon cloth, Dingqing rubber clamped nylon cloth
Spring range: 20~100, 80~240kPa
Air supply pressure: 140~400kPa
Air source interface: Rc1/4"
Ambient temperature: -30~+70ºC
Pneumatic fluorine-lined control valve valve action type: use positive or reverse acting actuators to realize the air-closing or air-opening of the valve
Accessories: positioner, air filter pressure reducer, position valve, travel switch, valve position transmitter, solenoid valve, handwheel mechanism, etc.

ModelZHA-22
ZHB-22
ZHA-23
ZHB-23
ZHB-34
ZHB-34
ZHA-45
ZHB-45
Effective area (cm2)350350560900
Stroke (mm)16254060
Spring range (KPa)20~100, 40~200;
80~240, 20~60, 60~100
Performance indicators

Leakage: less than 0.01% of the rated capacity of the valve
Backlash: with positioner: less than 1% of full stroke
Basic error: with positioner: less than ±1% of full stroke
Note: Use standard V-type PTFE packing
Adjustable range 30:1


Connection dimensions and standards

Flange standard: Cast iron is GB4216-86 Cast steel is GB9113-88, JB/T79-94
Flange seal standard: PN10, PN16 is RF, PN40,PN64 is FM, the body is M
Structural length standard: GB12221-89
Connection of actuator air signal: Internal thread M10×1
The flange and distance of flange end face can be manufactured according to the standard specified by the user. Such as ANSI, JIS, DIN standard.


More Products
 
Control ValvePneumatic Control Valve
Electric Control Valve
Manual Control Valve
Self Operated Control Valve
Ball ValvePneumatic Ball Valve
Electric Ball Valve
Manual Ball Valve
Butterfly ValvePneumatic Butterfly Valve
Electric Butterfly Valve
Manual Butterfly Valve
Other ValvesGlobe Valve
Gate Valve
Check Valve
Reducing Valve
Plug Valve
Safety Valve

Company development

Poisonous Substances Fluorinated Polymer Control Valve
Poisonous Substances Fluorinated Polymer Control Valve

Certifications

Poisonous Substances Fluorinated Polymer Control Valve
Poisonous Substances Fluorinated Polymer Control Valve
Company Show

Poisonous Substances Fluorinated Polymer Control Valve
FAQ:

1. Are you trading company or factory?
We are factory in Yongjia, Wenzhou, China.
2. Are the prodcuts certified?
Yes, ISO, FDA, SIL 2, CE, LFGB and so on.
3. Delivery time?
7-15 working days usually, but it will be longer when peak season.
4. MOQ?
One set.