Products

Waterproof Angled Jack BNC Electrical Connectors for PCB Mount

China Waterproof Angled Jack BNC Electrical Connectors for PCB Mount, Find details about China N Connector, RF Connector from Waterproof Angled Jack BNC Electrical Connectors for PCB Mount

Model NO.
BNC-001
Mounting Type
Surface Mount
Insulating Materials
PTFE
Contact Finish
Gold
Materials
Zinc Alloy,Brass
Standard
N Connector
Impedence
50 Ohm
Vswr
Straight
Trademark
HOLI
Transport Package
Standrad Pack, Customized Packing Acceptable
Specification
0.5*0.5*1(CM)
Origin
Cn
HS Code
8536909000
Model NO.
BNC-001
Mounting Type
Surface Mount
Insulating Materials
PTFE
Contact Finish
Gold
Materials
Zinc Alloy,Brass
Standard
N Connector
Impedence
50 Ohm
Vswr
Straight
Trademark
HOLI
Transport Package
Standrad Pack, Customized Packing Acceptable
Specification
0.5*0.5*1(CM)
Origin
Cn
HS Code
8536909000
Waterproof Angled Jack BNC Electrical Connectors for PCB Mount
 
The connectors are kind of low to medium power connectors, with screw coupling mechanism, are widely used connect of the RF coaxial-cable in electronic equipment and instruments, and can be interchange able with the same-type connectors of abroad. Characteristic impedance 50Ω and 75Ω.
Features & Benefits
 Broadband performance DC to 18 GHz with low reflection stainless steel construction and ¼ - 36 threaded coupling offers high performance in a compact design.
 Low cost Commercial Grade (Brass SMA) available in nickel or gold plating which provides approximately 30% cost reduction with 250 mating cycles.
 Available for .085" and .141" diameter semi-rigid cables and all the standard flexible cables including double shielded RG-316.
 Phase Adjustable SMA connectors provide ease of mechanical screw adjustments, compared to the delays and expense of laborious cable-trimming.
Applications
 Base Stations Cable Assemblies Components
 Instrumentation Mil/Aero PC/LAN
 Process Controls Telecom  
Specifications
Electrical
Impedance50Ω/75 Ω
Frequency Range0 - 11 GHz
Voltage Rating1,500 volts peak
VSWRMIL-C-39012 straight connectors: 1.3 max 0-11 GHz
MIL-C-39012 right angle connectors: 1.35 max 0-11 GHz
Dielectric Withstanding Voltage2,500 volts rms
Insulation Resistance5,000 MΩ minimum
Center Contact Resistance1.0 mΩ
Outer Contact Resistance0.2 mΩ
RF Leakage-90 dB minimum at 3 GHz
Insertion Loss.15 dB maximum at 10 GHz
Mechanical
Mating5/8-24 threaded coupling
Braid or Jacket Cable AffixmentAll crimps: hex braid crimp
Clamps: screw-thread nut and braid clamp
Center Conductor Cable AffixmentCrimp: crimp or solder
All others: solder only
Captivated ContactAll crimps unless specified otherwise
Cable RetentionCrimps: 60-120 lbs
Clamps: 30-70 lbs
Material
Male ContactsBrass, silver or gold plated
Female ContactsPhosphorous bronze or beryllium copper, silver or gold plated
Other Metal PartsBrass with ASTROplate® finish; M39012 has silver finish
InsulatorsTFE, copolymer of styrene or glass-TFE (hermetic seal)
Weatherproof GasketsSilicone rubber of synthetic rubber
Crimp FerruleCopper
Environmental
Temperature RangeTFE: -65°C to +165°C
WeatherproofAll series N with gaskets are weatherproof
Hermetic SealsPass helium leak test of 2x10-8 cc/sec
Pressurized ShockCompression seal MIL-STD-202, method 213
Note: These characteristics are typical but may not apply to all connectors.
Waterproof Angled Jack BNC Electrical Connectors for PCB MountWaterproof Angled Jack BNC Electrical Connectors for PCB MountWaterproof Angled Jack BNC Electrical Connectors for PCB MountWaterproof Angled Jack BNC Electrical Connectors for PCB Mount1.Q: Are you a manufacturer or a trading company ?
A: We are a professional manufacturer and have our own trading company in Hangzhou. The factory is located in Cixi, Zhejiang.
 

2.Q: How to buy products ?
Answer:
(1) Confirm whether the outer diameter of the cable can pass through the tail of the connector
(2) Confirm the number of cores, rated current, and working voltage.
(3) Choose appropriate according to detailed requirements Plug
(4) Confirmation of purchase
(5) Settlement is successful and waiting for confirmation of delivery

3.Q: How to get samples ?
A: I'm glad to provide you with samples, but we can only provide you with one set for free, and the freight should be paid by yourself.

4.Q: How many kinds of materials can you provide? 
A: There are several types of connectors
Different materials, we usually use nylon brass and gold materials to make the connector,of course we can also choose the material according to your requirements.

5.Q: How does your factory control quality?
A: Quality is the top priority. HOLI employees have always attached great importance to quality and controlled from beginning to end. Our products have passed UV anti-aging test certification, IPX7 waterproof test certification, IP68 Waterproof Test Certification! At the same time we have CE. ROHS certification.

This style of pins range from 2 to 12 pin. If you are interested in any item, please feel free to tell us and you will get a reply as soon as possible. Looking forward to your inquiry!Waterproof Angled Jack BNC Electrical Connectors for PCB Mount

You Might Also Like