Products

Modified Bentonite Cp-34 Organoclay

China Modified Bentonite Cp-34 Organoclay, Find details about China Organoclay, Modified Bentonite from Modified Bentonite Cp-34 Organoclay

Trademark
CP
Transport Package
Paper Bags
Specification
25Kg/bag
Origin
China
HS Code
382490000
Trademark
CP
Transport Package
Paper Bags
Specification
25Kg/bag
Origin
China
HS Code
382490000
Modified Bentonite CP-34 | Organoclay
Modified Bentonite CP-34 is an Organoclay Viscosifiers (modified bentonite), designed especially for use in solvent based system. Modified bentonite clay can be used widely in solvents from low polarity to medium-high polarity.
  

Properties
Composition                      Organic derivative of a montmorillonite clay
                 Appearance                       Fine powder, light yellow
                 Moisture content (105ºC,2hr)         ≤3.5%
                 Loss on ignition (1000ºC)            28%-30%
                 Bulk density                       0.53g/cm3
                 Fineness (<74μm, %)               ≥98%

Advantages
  • High gelling efficiency
  • Light color gel 
  • Produce reproducible thixotropic consistency over a wide temperature range
  • Imparts particle suspension, preventing hard settling of pigment and fillers.
  • Exerts strong film reinforcing action in organic binder systems.
 
Application
                     Modified Bentonite CP-34 is used in the following applications:
  • Marine paint, Industrial paint, heavy-duty, anticorrosion paint such as bituminous coatings, polyester paints, Alkyd paints.
  • Sealant
  • Inks
  • Grease
  • Unsaturated polyester putty


Using
Modified Bentonite  CP-34 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 40%~50% of Modified Bentonite  CP-34 in weight. If in xylene system, addition level of polar activator is about 30%-40% of CP-34 in weight.
Pre-gel is made as below procedure.
  1. Charge solvent to mill
  2. Slowly add CP-34(6-10% by weight of total pregel) to mill under agitation.
  3. Mix at high speed for 5 minutes.
  4. Add polar activator.
  5. Mix at high speed for 5 minutes.

Safety
All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

Package
Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Storage
Modified Bentonite CP-34 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Notice
The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All Modified Bentonite are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.
 

You Might Also Like