TTC10 tool setter is a kind of portable tool setter specially used to set the length parameter of cutting tool in the CNC milling machine, or drilling machine center and etc, it is especially suitable for single piece and a small batch of production.

Technical Parameters:
Nominal height: 80.0±0.003 mm;
Diameter of the touching face( for cutting tool touching): 30.0 mm;
Hardness of the touch face: HRC 60-62;
Travel distance of the touch face in -Z direction: 5 mm;
Trigger repeatability of the tool setter(2σ): ≤ 2 μm;
The parallelism between the touching face and the bottom: ≤ 3 μm;
Seal grade: IP66.



Technical Characteristics:
Appling two position indicators for warning to speed up the process of the cutting tool calibration;
four Magnets inset in bottom of tool setter order to the tool setter with a adsorption capacity;
It's powered by a battery, model: CR2,3.0V,800 mAh;
Three LED indicator lights and a buzzer are used to indicate the working status of the tool setting.

Application:

Set length parameters of cutting tools manually before CNC processing;
Detect wear and breakage of cutting tools manually between two
processes or after the CNC processing;
Applicable equipments: machine centers, CNC boring machines, CNC
milling machines, and drilling-tapping machine centers, etc;