Small 40 Tons Per Hour Mobile Asphalt Bitumen Batching Plant

China Small 40 Tons Per Hour Mobile Asphalt Bitumen Batching Plant, Find details about China Asphalt Plant, Mobile Asphalt Plant from Small 40 Tons Per Hour Mobile Asphalt Bitumen Batching Plant

Basic Info.

Model NO.

MDHB40

Certification

ISO9001: 2000, CE

Condition

New

Work Type

Mobile Continuous Drum Mix

Capacity

40 Tons Per Hour

Operation

Full Auto/Manual Operation

Plant Covering Area

Length: 33m, Width: 20m, Max. Height Point: 12m

Trademark

ORIEMAC

Transport Package

Nude Packing

Specification

7250*2580*3290mm

Origin

China

HS Code

84743200

Model NO.

MDHB40

Certification

ISO9001: 2000, CE

Condition

New

Work Type

Mobile Continuous Drum Mix

Capacity

40 Tons Per Hour

Operation

Full Auto/Manual Operation

Plant Covering Area

Length: 33m, Width: 20m, Max. Height Point: 12m

Trademark

ORIEMAC

Transport Package

Nude Packing

Specification

7250*2580*3290mm

Origin

China

HS Code

84743200

Product Desciption

40t/h mobile asphalt batching plant

/MDHB40	/Specification		QTY	/Picture
1. /Cold Aggregate Feeding System	,4m³,2.78m,		4
	four storage bins ,volume 4m³X4=16m³; unload height 2.78m
	B500,:B500X3400mm		4
	variable speed discharge belt B500, size: B500*3400mm
	B500,60 Tons Per Hour		1
	aggregate collecting belt B500, max. capacity: 60 Tons Per Hour
	0.25kw;1.5kwX4;4kw		1
	sand vibration motor: 0.25kw; feeder motor: 1.5kw*4, collection motor: 4kw
2. /Oversize Screen	,≥40mm 2.2kw		1
	oversize screen, aggregate ≥40mm will be taken out, power: 2.2kw
3. /Aggregate Feeding Belt	B500,4kw		1
	aggregate feeding belt B500, motor power: 4kw
4. /Bitumen Supply System	10t (4kw,),		1
	10t direct-heating bitumen tank (induced draft fan: 4kw, small diesel burner)
	,		1
	all bitumen pipe, small steam boiler
	,,		1
	bitumen pumps, heat valves, pipes
5. /Drying & Mixing Drum	Φ1200X5000mm,40 Tons Per Hour		1
	drying drum dimensions: Φ1200*5000mm, capacity: 40 Tons Per Hour
	:;:11kw
	driving type: gear, motor 11kw
			1
	temperature sensor with infrared thermometer
6. /Burner	,,:450 Kg/h		1
	diesel burner, max burning capacity: 450 kg/h
			1
	equipped with automatic flame failure protection devices for emergency
	,4kw		1
	fuel pump, power: 4kw
	,11kw		1
	air-blower, power: 11kw
	5t		1
	fuel tank 5t
7. /Mixed Asphalt Elevator	,5.5kw		1
	bucket elevator, motor power: 5.5kw
8. /Mixed Asphalt Storage Silo	2.5m³		1
	storage silo volume: 2.5m³
			1
	level indicator
			1
	temperature sensor
	2.5m		1
	unloading height: 2.5m
9. /Dust Collection System			1
	cyclone dust filter
	,7.5kw		1
	centrifugal fan, power: 7.5kw
	,		1
	pipeline and chimney
10. /Control System			1
	electrical motor control system
	+++
	breaker+ short-circuit protection+ overload protection +contactor
			1
	aggregate temperature control system
	,
	infrared thermometer, computor auto control
			1
	burner control system
	,,,,
	PLC control system , auto start/firing, safety monitoring, automatic fault protection
			1
	weighing control system
	,,,,
	PLC control , color display, auto weighing, auto error correction, formula input, printing output
			1
	mixing control system
	,/,
	PLC control, manual/auto operation, formula input
	3000×2200×2500mm		1
	control room:3000×2200×2500mm
11. Additional supply	/Accessories	1

Standard working condition mentioned contains the following factors
A. Environmental temperature is 20 ºC with standard atmospheric pressure; altitude ≤2000m;

B. Average moisture content of cold aggregate <5%;

C. Hot aggregate temperature <160 ºC;

D. Finished materials is medium-grained, the stone volume-weight ≥1600kg/m³;

E. Sand content <35%;

F. The ratio of aggregate shall meet the national standard. Dust content of cold aggregate ≤3%;

G. Cold aggregate should be clean enough without too much dirt or other material. Cold aggregate gradation should be continuous;

H. Cold aggregate shall not contain large amounts of oversized material, otherwise it will cause blocking, resulting in reduced ability to supply aggregate;

I. Moisture content of powder must be less than 0.5%, and there should be no lumping or arching, otherwise it will cause supplying interruption or lag, which can affect the productivity;