Compared with the fuel forklift, the car electric forklift can replace 1.5 liters of gasoline, and the operation is very simple and safe. The outstanding characteristics of the car mounted electric forklift are economy, practicality, environmental protection and energy saving. Therefore, in today's rising crude oil price, it is an inevitable trend for car electric forklift to replace fuel forklift. At present, the one ton pure electric forklift produced by domestic well-known brand forklift factory adopts imported accessories, which is expensive and costly.
Use method of electric forklift
1. Keep proper starting speed when starting, and do not rush
2. Pay attention to the voltage of the voltmeter. If it is lower than the limit voltage, stop the operation
3. It is not allowed to change the driving direction by pulling the direction switch during the traveling of the forklift to prevent burning out electrical components and damaging gears
4. Driving and lifting should not be carried out at the same time
5. Pay attention to driving hand washing. hydraulic pressure; Check whether the flow direction sound is normal. In case of abnormal sound, the fault shall be eliminated in time. It is strictly prohibited to operate with disease
6. Slow down in advance when changing
7. When working on poor roads, the weight shall be appropriately reduced and the driving speed shall be reduced.
Model | SC-0.5T | SC-1T | SC-1.5T | SC-2T |
Max lifting capacity | 0.5Ton | 1Ton | 1.5Ton | 2Ton |
Product voltage | 60v | 60v | 60v | 60v |
Traveling motor | Brushless motor 2.2kw | Brushless motor 3kw | Brushless motor 4kw | Brushless motor 5kw |
Lifting motor | 1.5kw | 1.5kw | 1.5kw | 3.0kw |
Turning radius | 45 degrees/90 degrees | 90 degrees(Can turn in place) | 90 degrees | 90 degrees |
Fork | 1m | 1.07m | 1.22m | 1.22m |
Frame material | Thickened steel plate body | Thickened steel plate body | Thickened steel plate body | Thickened steel plate body |
Solid tire | Front wheel 500-8, rear wheel 400-8 | Front wheel 500-8, rear wheel 400-8 | Front wheel 500-8, rear wheel 400-8 | Front wheel 650-10, rear wheel 500-8 |
Five batteries | Standard configuration 180 | Standard configuration 260 | Standard configuration 320 | Standard configuration320 |
Endurance | 6-8hours | 6-8hours | 8-10hours | 8-10hours |
Cylinder | Single cylinder | Double cylinder | Double cylinder | Double cylinder |
Steering system | Hydraulic / mechanical assistance | Hydraulic power | Hydraulic power | Hydraulic power |
Gantry material | C-shaped steel | C-shaped steel | C-shaped steel | G+C-shaped steel |
Lifting height | 2m | 3m | 3m | 3m |
Product weight | 1.1t | 1.7t | 2.1t | 3t |
1.What about the payment term&price term?As usual, we accept T/T as the payment term, and the price term FOB is ok.
2.Are you a trading company or a factory?Xingtai Sichuang Manufacturing Co., Ltd. is a manufacturer in Hebei Province, China. we have specialized in we have specialized in crane&winch over 10 years, our high quality products were welcomed in many countries.
3.How do you make your price?We make the price according to our comprehensive costing. And our price will lower than the trade company because we are manufacture.You will get competitive price and better quality.
4.How about the packing?Outside Package: Wooden packing case as export standard ; Inside Package: Stretch film
5. What's the delivery time?Usually, we will delivery the goods within 15-20 working days, but this is aim at 1-10 pieces products, if more quantity, it depends.
6. Questions before quotation?
Capacity? Lifting height? Voltage? Quantity? The more details the more accurate price quotation. Thank you.
7.what about our winches features?
1, Compact structure and reasonable design
2, Easy to install, operate and maintenance
3, Low noise and good working condition
4, Three-phase power supply, suitable for a wide range of applications
5, Simple structure, easy to identify the cause of the failure, easy to repair and maintain