Whole House Electric Complete Set Current Transfomer
China Whole House Electric Complete Set Current Transfomer, Find details about China Current Transfomers, Whole Set from Whole House Electric Complete Set Current Transfomer
Basic Info.
Model NO.
electric complete set
Usage
Power Transformer
Frequency Characteristics
Power Frequency
Shape of Core
EI
Brand
Shouye
Impedance Voltage
4.0%
Type
Single-Phase Transformer
Shape of Cores
Od
Vector Group
Dyn11
Characteristics
Power Frequency
Low Voltage
0.4kv
75ºC (W) Load-Loss
Short Circuit Impedance (%)
Rated Voltage
H.V.TM.V.Tl.V.Tequipmenttl*W*Ht (Kv)T(Kv)T(Kv)
Trademark
SHUOYE
Transport Package
Wooden
Specification
800*500*850
Origin
China
HS Code
8504329000
Model NO.
electric complete set
Usage
Power Transformer
Frequency Characteristics
Power Frequency
Shape of Core
EI
Brand
Shouye
Impedance Voltage
4.0%
Type
Single-Phase Transformer
Shape of Cores
Od
Vector Group
Dyn11
Characteristics
Power Frequency
Low Voltage
0.4kv
75ºC (W) Load-Loss
Short Circuit Impedance (%)
Rated Voltage
H.V.TM.V.Tl.V.Tequipmenttl*W*Ht (Kv)T(Kv)T(Kv)
Trademark
SHUOYE
Transport Package
Wooden
Specification
800*500*850
Origin
China
HS Code
8504329000
Product Desciption
2.Technical Data
Note:
2.1, For transformer whose rated capacity is 500 KVA and below, the load loss value above the slash in the table is suitable for Dyn11 or Yzn11 connection groups, and that below the slash for YynO connection groups.
2.2, Transformers whose HV tapping range is ±2×2.5 may be provided, if need be.
2.3, Transformers whose LV is 0.69KV may be provided, if need be.
2.4, Users may choose other loss values as they need.
2.5, Due to product upgrading and changes to the external dimensions and products in the table, please refer to the external dimensions provided at the time of ordering.
Application:
10-35 kV power system of power plant, substation, mining enterprise and etc.
Technologies:
Design: relative developed software are adopted in Electromagnetic calculations, strength analysis, leakage magnetic distribution, its electro-dynamic force and electrical insulation.
Manufacture:
Core: effectively upgrade transformer's no-load performance by below methods:
1) The core is made of high-permeable grain-orientated top quality cold-rolled silicon sheet and the material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burs controlled within 0.02mm.
2) The silicon sheet fabrication adopts "no-upper yoke lapped' technology and all lapped joints of the silicon sheet are 45 full-miters. The laminated core sheets are integrally pressed and adhered with epoxy resin to make the three leg two-yoke core a strong and flat integral one with good verticality precision, this effectively improves no-load performance and reduces noises.
3) Bracing plates are used as support between coil leg and inner coil. The iron yoke is tied with epoxy resin-impregnated glass fiber band, and the lower section of oil tank is tightened with counter-pressure bolts. The upper iron and the upper section of oil tank are fixed at three locations. Hence the body inside the oil tank can withstand the vibration during transportation without any shift.
Winding:
1) The high-voltage (HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed. All stays and pads are chamfered to keep highly reliable insulation.
2) In the transformer winding there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation. The HV and MV regulation system are independently provided with voltage-regulating winding to balance the ampere turn of each winding, effectively lower the axial electrodynamic force generated at short-circuit of transformer and improve abrupt short-circuit withstanding capacity.
3) The winding adopts radial "0" margin designed, between the core and the paper sleeve of LV winding, and between the LV, HV, voltage-regulating windings, as well as before insertion of stays and shroud plate they are fully dried and tightly matched to ensure extremely good compactness and concentricity of the entire winding.
Oil tank and accessories
1) The tank wall adopts wide steel sheet, which will be folded into corrugated structure without splicing, in this way welds are decreased and mechanical strength is enhanced, meanwhile, the corrugated wall has diverging effect, and thus plays a role in decrease of noise. The routing troughs and control cabinets of the secondary circuit are all made of stainless steel, so the entire transformer has a simple and good looking.
2) All sealing surface use quality sealing material and are precision-machined.
3) On the edge of the tank there are double sealing grooves, and the outer sealing material is used to shade the atmosphere and ultra-ray to protect the inner sealing being damaged, thus at utmost prolonging service life and enhancing reliability of the seal.
6..RFQ
6.1.Q: Are you manufacturer?
A: Yes, we are manufacturer. Our factory is in Binzhou City, Shandong Province.
6.2.Q: Can I get guarantee of products?
A: Yes, every product is 1 year quality warrantee under customer correct using the products.
6.3.Q: Do you have any Certificate?
A: Yes. Each of our unit has CCC certificate. All the electric parts with CE certificate, If you need any other Certificate, we can help you to get it.
6.4.Q: How to buy it? What about the delivery?
A: Please contact me by email or online, let me know your situation, I will give you professional solution.We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
6.5.Q: How can I pay you?
A: T/T, L/C is very well used.
6.6.Q: What about the production?
A: Produce time is 4~6weeks.
6.7.Q: Could you offer some spare parts?
A: Yes, no problem.
6.8.Q: What about the maintenance?
A: All the goods past the test, maintenance is very easy.7
| Rated Capacity (KVA) | Rated Voltage | Connection Symbol | No-load Loss (KW) | No-load Current (%) | 75ºC (W) Load-Loss | Short Circuit Impedance (%) | Weight (Kg) | Boundary Dimension (mm) | Sound power Level (db) | |||
| H.V. | M.V. | L.V. | Equipment | L*W*H | ||||||||
| (KV) | (KV) | (KV) | ||||||||||
| 30 | 6 6.3 10 10.5 11 | ±5% or ±2×2.5% | 0.4 | Dyn11 Yyn0 Yzn11 | 80 | 0.3 | 630/600 | 4 | 330 | 800*500*850 | 35 | |
| 50 | 100 | 0.24 | 910/870 | 380 | 820*550*850 | 35 | ||||||
| 63 | 110 | 0.23 | 1090/1040 | 410 | 835*580*850 | 35 | ||||||
| 80 | 130 | 0.22 | 1310/1250 | 430 | 840*600*880 | 36 | ||||||
| 100 | 150 | 0.21 | 1580/1500 | 460 | 860*600*890 | 36 | ||||||
| 125 | 170 | 0.2 | 1890/1800 | 590 | 1020*660*880 | 37 | ||||||
| 160 | 200 | 0.19 | 2310/2200 | 650 | 1035*660*950 | 38 | ||||||
| 200 | 240 | 0.18 | 2730/2600 | 710 | 1040*680*980 | 39 | ||||||
| 250 | 290 | 0.17 | 3200/3050 | 850 | 1140*740*1010 | 40 | ||||||
| 315 | 340 | 0.16 | 3830/3650 | 970 | 1160*760*1150 | 42 | ||||||
| 400 | 410 | 0.16 | 4520/4300 | 1130 | 1230*800*1200 | 44 | ||||||
| 500 | 480 | 0.16 | 5410/5150 | 1335 | 1320*900*1200 | 45 | ||||||
| 630 | Dyn11 Yyn0 | 570 | 0.15 | 6200 | 4.5 | 1630 | 1420*920*1230 | 46 | ||||
| 800 | 700 | 0.15 | 7500 | 1950 | 1480*1000*1330 | 47 | ||||||
| 1000 | 830 | 0.14 | 10300 | 2205 | 1600*1100*1280 | 48 | ||||||
| 1250 | 970 | 0.13 | 12000 | 2565 | 1655*1135*1375 | 49 | ||||||
| 1600 | 1170 | 0.12 | 14500 | 3100 | 1815*1260*1450 | 49 | ||||||
| 2000 | 1550 | 0.11 | 18300 | 5 | 3785 | 1920*1305*1510 | 50 | |||||
| 2500 | 1830 | 0.1 | 21200 | 4570 | 2120*1430*1575 | 50 | ||||||
Note:
2.1, For transformer whose rated capacity is 500 KVA and below, the load loss value above the slash in the table is suitable for Dyn11 or Yzn11 connection groups, and that below the slash for YynO connection groups.
2.2, Transformers whose HV tapping range is ±2×2.5 may be provided, if need be.
2.3, Transformers whose LV is 0.69KV may be provided, if need be.
2.4, Users may choose other loss values as they need.
2.5, Due to product upgrading and changes to the external dimensions and products in the table, please refer to the external dimensions provided at the time of ordering.
Application:
10-35 kV power system of power plant, substation, mining enterprise and etc.
Technologies:
Design: relative developed software are adopted in Electromagnetic calculations, strength analysis, leakage magnetic distribution, its electro-dynamic force and electrical insulation.
Manufacture:
Core: effectively upgrade transformer's no-load performance by below methods:
1) The core is made of high-permeable grain-orientated top quality cold-rolled silicon sheet and the material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burs controlled within 0.02mm.
2) The silicon sheet fabrication adopts "no-upper yoke lapped' technology and all lapped joints of the silicon sheet are 45 full-miters. The laminated core sheets are integrally pressed and adhered with epoxy resin to make the three leg two-yoke core a strong and flat integral one with good verticality precision, this effectively improves no-load performance and reduces noises.
3) Bracing plates are used as support between coil leg and inner coil. The iron yoke is tied with epoxy resin-impregnated glass fiber band, and the lower section of oil tank is tightened with counter-pressure bolts. The upper iron and the upper section of oil tank are fixed at three locations. Hence the body inside the oil tank can withstand the vibration during transportation without any shift.
Winding:
1) The high-voltage (HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed. All stays and pads are chamfered to keep highly reliable insulation.
2) In the transformer winding there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation. The HV and MV regulation system are independently provided with voltage-regulating winding to balance the ampere turn of each winding, effectively lower the axial electrodynamic force generated at short-circuit of transformer and improve abrupt short-circuit withstanding capacity.
3) The winding adopts radial "0" margin designed, between the core and the paper sleeve of LV winding, and between the LV, HV, voltage-regulating windings, as well as before insertion of stays and shroud plate they are fully dried and tightly matched to ensure extremely good compactness and concentricity of the entire winding.
Oil tank and accessories
1) The tank wall adopts wide steel sheet, which will be folded into corrugated structure without splicing, in this way welds are decreased and mechanical strength is enhanced, meanwhile, the corrugated wall has diverging effect, and thus plays a role in decrease of noise. The routing troughs and control cabinets of the secondary circuit are all made of stainless steel, so the entire transformer has a simple and good looking.
2) All sealing surface use quality sealing material and are precision-machined.
3) On the edge of the tank there are double sealing grooves, and the outer sealing material is used to shade the atmosphere and ultra-ray to protect the inner sealing being damaged, thus at utmost prolonging service life and enhancing reliability of the seal.
6..RFQ
6.1.Q: Are you manufacturer?
A: Yes, we are manufacturer. Our factory is in Binzhou City, Shandong Province.
6.2.Q: Can I get guarantee of products?
A: Yes, every product is 1 year quality warrantee under customer correct using the products.
6.3.Q: Do you have any Certificate?
A: Yes. Each of our unit has CCC certificate. All the electric parts with CE certificate, If you need any other Certificate, we can help you to get it.
6.4.Q: How to buy it? What about the delivery?
A: Please contact me by email or online, let me know your situation, I will give you professional solution.We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
6.5.Q: How can I pay you?
A: T/T, L/C is very well used.
6.6.Q: What about the production?
A: Produce time is 4~6weeks.
6.7.Q: Could you offer some spare parts?
A: Yes, no problem.
6.8.Q: What about the maintenance?
A: All the goods past the test, maintenance is very easy.7
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......