Lithium Polymer Battery Pouch Cell Electrode Die Cutting Machine Cutter

China Lithium Polymer Battery Pouch Cell Electrode Die Cutting Machine Cutter, Find details about China Electrode Cutter, Battery Cutting Machine from Lithium Polymer Battery Pouch Cell Electrode Die Cutting Machine Cutter

Basic Info.

Model NO.

TOB-DMQ-350

Model NO.

TOB-DMQ-350

Product Desciption

Lithium Polymer Battery Pouch Cell Electrode Die Cutting Machine Cutter

1 Equipment introduction

1.1 Introduction to equipment functions and principles

The die cutting machine is used for Lithium battery anode and cathode die cutting.
The device is composed of an automatic discharging device, an electrode limiting device, an electrode punching cutting device, a driving traction device, and an automatic waste collecting device.
Main action flow of equipment

Lithium Polymer Battery Pouch Cell Electrode Die Cutting Machine Cutter
1.2 Equipment Appearance (only for reference)

Dimensions:1600*1000*1800mm(L*W*H)

Lithium Polymer Battery Pouch Cell Electrode Die Cutting Machine Cutter

2 Equipment technical parameters

2.1 Product specification range (electrode size) that the equipment can produce.

After the electrode is cut, the size range
No	Name	Size(mm)
1	Electrode width W	50~280
2	Electrode height H	50~320
3	Tab height Ht	10~20
4	Tab edge D	5~20
5	Tab width Wt	30~60

Lithium Polymer Battery Pouch Cell Electrode Die Cutting Machine Cutter

Note: The actual machineable specifications of the equipment are determined by the size selected by the customer and the size of the cutting die.

2.2 Main technical parameters of the equipment

No	Equipment parameter index	Parameter
1	Maximum feed width	350mm
2	Maximum processing area	Automatic punching 340280mm (manual punching 350350mm)
3	Equipment running speed	1000-9000 times/h
4	Die thickness requirements	thickness > 8mm
5	Feed control	Feeding speed and step adjustment
6	Shipping distance accuracy	±0.1mm
7	Safety equipment	Infrared grating protection and safety shield
8	Feed step accuracy	<0.1mm
9	Operation interface	Intelligent human machine interface
10	Roll material weight	<50kg
11	Roll material outer diameter	<400mm
12	Punching knife life	1-5 million times (depending on the quality of the die and the accuracy of the machine)
13	Burr degrees	<0.02
14	Feed roll diameter	3 inches (inside diameter)
15	Waste recycling	Automatic waste separation and recovery device
16	Operating mode	Auto/manual mode
17	Control System	Intelligent microcomputer control
18	Total power	3.6KW
19	Power voltage	AC220V
20	Machine weight	1500kg