High Impact Resistance Marble Process Wear Resistance Conveyor Belt

China High Impact Resistance Marble Process Wear Resistance Conveyor Belt, Find details about China Conveyor Belt, PVC Conveyor Belt from High Impact Resistance Marble Process Wear Resistance Conveyor Belt

Model NO.
MP42-75/23
Color
Petrol Green
Length
2130mm
Total Thickness
12.5mm
Surface
Tooth
Ply
3
Bottom
High Tensile Fabric
Total Weight
11 Kg/M2
Top Coating Hardness
55 Shorea
Tension 1% Elongation
70n/mm
Min.Pulley Diameter
300 mm
Antistatic
Yes
Guide
10*6
Max.Production Width
20mm
Working Temperature Range
-15/+80ºC
Trademark
Uni Belting
Transport Package
Export Standard
Specification
saw tooth pattern 2130X85mm with 10 X6 guide
Origin
Shanghai/China
HS Code
591000000
Model NO.
MP42-75/23
Color
Petrol Green
Length
2130mm
Total Thickness
12.5mm
Surface
Tooth
Ply
3
Bottom
High Tensile Fabric
Total Weight
11 Kg/M2
Top Coating Hardness
55 Shorea
Tension 1% Elongation
70n/mm
Min.Pulley Diameter
300 mm
Antistatic
Yes
Guide
10*6
Max.Production Width
20mm
Working Temperature Range
-15/+80ºC
Trademark
Uni Belting
Transport Package
Export Standard
Specification
saw tooth pattern 2130X85mm with 10 X6 guide
Origin
Shanghai/China
HS Code
591000000
High Impact Resistance Marble Process Wear Resistance Conveyor BeltHigh Impact Resistance Marble Process Wear Resistance Conveyor BeltHigh Impact Resistance Marble Process Wear Resistance Conveyor BeltHigh Impact Resistance Marble Process Wear Resistance Conveyor BeltHigh Impact Resistance Marble Process Wear Resistance Conveyor BeltHigh Impact Resistance Marble Process Wear Resistance Conveyor BeltRECOMMENDATIONS FOR USING, INSTALLATION, STORAGE AND MAINTENANCE OF BELTS:

Storage

Recommendations:
- Belts are stored in their original packing until they are installed.
- Belts' protection from the low temperatures and the sunlight is necessary.
- If the storage conditions are very different from the working conditions, it is recommended to wait at least 12 hours under normal operating temperature before installation.
Before installation
Before installation it is recommended to clean the conveyor.
Replacing the old belts allow the maintenance of the other conveyor components.
- Clean the shafts and the belt supports.
- Check the position of drums and shafts. If it is necessary align them.
- Install tension devices to the minimum position.
- Check the drive drum cover or replace it.
Installation
Install the belt on the conveyor. Please note: on the belt should not be any folds and creases.
Tension
Tighten the belt so that there is no slippage of the drive drum with a full load and before work start.
Maintenance
Properly selected belts are stable and resistant to the transported products.
Belts do not have any extraneous odors, do not start staining the products and do not affect the quality of the products.
Belts are easy to clean with water and neutral washing detergents. 
To prevent belt's slipping it is necessary to clean the conveyor regularly. 
Belt's slipping leads to its irreparable damage.