Transport Mine, Sand, Stone, Rubber (EP) Conveyor Belt

China Transport Mine, Sand, Stone, Rubber (EP) Conveyor Belt, Find details about China Industrial Conveyor Belt, Conveyor Belt from Transport Mine, Sand, Stone, Rubber (EP) Conveyor Belt

Basic Info.

Model NO.

NN500

Trademark

FUYUE

Specification

Width: 300-2300(mm)

Origin

Taizhou, Zhejiang

HS Code

4010120000

Model NO.

NN500

Trademark

FUYUE

Specification

Width: 300-2300(mm)

Origin

Taizhou, Zhejiang

HS Code

4010120000

Product Desciption

Transport mine,sand,stone,Rubber (EP) conveyor belt

FUYUE conveyor belt can meet serious working condition. In addition to a range for normal bulk goods, various special types are available for conveying hot goods, for the transport of goods containing oil and grease, or steep-incline conveying and with special reinforcing materials for particular applications…

Details of Multi-Ply canvas conveyor :

Structure of coal mine conveyor belt

1. Plies: 1-10ply

2: width: 100-2300mm

3. Thickness: 5-30mm

4. Tensile Strength: 9-25MPA

5. High wear-resisting

Fabric Material	Fabric structure		Fabric code	No.of fabric plies	Width mm	Length m	Cover thickness mm
	Warp	Weft					Cover thickness mm
	Warp	Weft					Top	Bottom
Polyester canvas	Polyester	Nylon of Polyester	EP100	2-10	350-2000	10-400	2-12	1-5
			EP150	2-10	350-2000	10-400	2-12	1-5
			EP200	2-10	350-2000	10-400	2-12	1-5
			EP250	2-10	350-2000	10-400	2-12	1-5
			EP300	2-6	350-2000	10-400	2-12	1-5
			EP400	2-6	350-2000	10-400	2-12	1-5
			EP500	2-6	350-2000	10-400	2-12	1-5
			EP600	2-4	350-2000	10-400	2-12

Usage:

Rubber conveyor belt Used for transferring nubbly, grainy, and farinose things at a high speed in a middle and long distance with higher load.

Standards:

GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc.

Standards	Cover Rubber			Adhesion
Standards	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply
DIN 22102	Mpa	%	mm3	N/mm	N/mm
DIN 22102	Mpa	%	mm3	(<=1.5mm)	(>1.5mm)
DIN 22102-Z	15	350	250	3.5	4.5
DIN 22102-W	18	400	90	3.5	4.5
DIN 22102-Y	20	400	150	3.5	4.5
DIN 22102-X	25	450	120	3.5	4.5

Standards	Cover Rubber			Adhesion
Standards	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm	N/mm	N/mm
RMA	Mpa	%	mm3	(<=1.6mm)	(>1.6mm)	N/mm
RMA-I	17	400		3	4.4	4
RMA-II	14	400		3	4.4	4

types of EP conveyor belt : Besides General EP Belt, there are Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, Antistatic electricity type, High-grade type and Industrial coal mine conveyor belt etc.

The physical and mechanical properties:

1. The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt. 2. Tensile property of through thickness: a. The longitudinal tensile strength is not lower than the following nominal value: 315 400 500 600 630 800 900 1000N/mm b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%. c. Industrial coal mine conveyor belt Straightness: no more than 25mm. d. plunger bond strength:

Pictures of Multi-Ply canvas conveyor :