Gold Limestone Gravel Sand Hard Stone Crushing Machine Supplier Double Toothed Roller Mill Crusher
China Gold Limestone Gravel Sand Hard Stone Crushing Machine Supplier Double Toothed Roller Mill Crusher, Find details about China Roller Crusher, Roll Crusher from Gold Limestone Gravel Sand Hard Stone Crushing Machine Supplier Double Toothed Roller Mill Crusher
Basic Info.
Roller Material
Alloy Steel
Color
Customerized
Spare Parts Supply
Provide
Flowchart
Provide
Foundation Drawing
Provide
Trademark
ZONEDING
Origin
Henan China
Roller Material
Alloy Steel
Color
Customerized
Spare Parts Supply
Provide
Flowchart
Provide
Foundation Drawing
Provide
Trademark
ZONEDING
Origin
Henan China
Product Desciption
Roller Crusher Introduction
For roller crusher, it is suitable for fine operation with feed size less than 80mm and finished product size of 50 m-20mm.Such as the use of pebbles, construction waste artificial sand;Mining fine iron ore, quartz stone;Ceramic industry broken raw materials.It is applicable to the coarse and intermediate crushing of brittle block materials in cement, chemical industry, electric power, mining, metallurgy, building materials, refractory materials, coal mines and other industries, with large incoming particle size and adjustable discharging particle size. It can crush materials with compressive strength ≤160MPa.
The characteristics:
Working principle of double roll crusher
It is mainly composed of fixed and movable crushing roller, pressing and adjusting device and driving device.The working mechanism is two cylindrical rollers.A roller is supported by a fixed bearing and a roller is supported by a movable bearing.The electric motor drives the two rollers to rotate relative to each other.The material is crushed by the friction of the two rotating rollers, and the broken material is discharged from the two rollers by gravity.The spring is sufficient to balance the pressure between the two rollers.If there is a non-crushing falling into the two rollers, can push the bearing compression spring to create a large gap to make the non-crushing thing through, after the non-crushing thing through, the spring can make the gap between the two rollers to maintain the original size, continue to work.
Techinical datas of double roller crusher:
Working site:
we can supply stone crusher production line, about customized details, Pls contact us!
For roller crusher, it is suitable for fine operation with feed size less than 80mm and finished product size of 50 m-20mm.Such as the use of pebbles, construction waste artificial sand;Mining fine iron ore, quartz stone;Ceramic industry broken raw materials.It is applicable to the coarse and intermediate crushing of brittle block materials in cement, chemical industry, electric power, mining, metallurgy, building materials, refractory materials, coal mines and other industries, with large incoming particle size and adjustable discharging particle size. It can crush materials with compressive strength ≤160MPa.
The characteristics:
1. Equipped with a roller crusher in the mineral grinding production line, the grinding equipment can give full play to its production capacity, generally increasing the output by 30%-40% and reducing the total energy consumption by 20%-30%.
2. Compact structure, light weight, small size, for the same production capacity of large requirements of the grinding system, the equipment of the roller crusher can significantly save investment.
3. Simple structure, small space, convenient operation and maintenance.
4. It is equipped with dust proof plate, with good sealing performance, which can avoid the spatter of small materials after crushing, with less dust, low working noise and better working environment.
2. Compact structure, light weight, small size, for the same production capacity of large requirements of the grinding system, the equipment of the roller crusher can significantly save investment.
3. Simple structure, small space, convenient operation and maintenance.
4. It is equipped with dust proof plate, with good sealing performance, which can avoid the spatter of small materials after crushing, with less dust, low working noise and better working environment.
5. The weight of the abrasive roller is newly optimized, the equipment does not need to change the mill roller for life, while the old roller machine needs to be dismantled for overhaul and replaced after being used for one year.
6. The roller crusher is equipped with a replaceable wear-resistant lining plate. The wear-resistant lining plate is made of domestic advanced wear-resistant materials, which has the advantages of long service life, not easy to damage and convenient maintenance.The continuous service life can reach more than one year, if the wear is serious, remove the boot cover can be replaced.The maintenance quantity is small, the cost is low, this is any other type of domestic crusher is incomparable.
6. The roller crusher is equipped with a replaceable wear-resistant lining plate. The wear-resistant lining plate is made of domestic advanced wear-resistant materials, which has the advantages of long service life, not easy to damage and convenient maintenance.The continuous service life can reach more than one year, if the wear is serious, remove the boot cover can be replaced.The maintenance quantity is small, the cost is low, this is any other type of domestic crusher is incomparable.
7. The roll crusher is equipped with safety protection device. When an unexpected metal iron piece enters the crushing chamber, the protection device will move and the iron piece leakage device will operate normally.
8. The gap of the abrasive body of the roll crusher can be adjusted arbitrarily between 1mm and 20mm. After the gap is adjusted according to the requirements of the crushing particle size, the crushing particle size can be controlled reliably, and all of them can be discharged under the crushing chamber with the ideal particle size.
8. The gap of the abrasive body of the roll crusher can be adjusted arbitrarily between 1mm and 20mm. After the gap is adjusted according to the requirements of the crushing particle size, the crushing particle size can be controlled reliably, and all of them can be discharged under the crushing chamber with the ideal particle size.
9. Simple and reasonable structure, low operating cost, smooth operation, high efficiency and energy saving, high crushing efficiency, adjustable discharging particle size.
10. Roller crusher is the working principle of low speed and high pressure roller extrusion.The material from the upper part of the crusher falls vertically into the crushing chamber. Under the pressure of crushing caused by the strong pressure generated between the two rollers, most of the material has become powdery, and a large number of cracks have been generated in the interior of the remaining part of the granular material.In the course of further crushing, the grinding energy consumption can be greatly reduced and the output can be increased.
10. Roller crusher is the working principle of low speed and high pressure roller extrusion.The material from the upper part of the crusher falls vertically into the crushing chamber. Under the pressure of crushing caused by the strong pressure generated between the two rollers, most of the material has become powdery, and a large number of cracks have been generated in the interior of the remaining part of the granular material.In the course of further crushing, the grinding energy consumption can be greatly reduced and the output can be increased.
Working principle of double roll crusher
It is mainly composed of fixed and movable crushing roller, pressing and adjusting device and driving device.The working mechanism is two cylindrical rollers.A roller is supported by a fixed bearing and a roller is supported by a movable bearing.The electric motor drives the two rollers to rotate relative to each other.The material is crushed by the friction of the two rotating rollers, and the broken material is discharged from the two rollers by gravity.The spring is sufficient to balance the pressure between the two rollers.If there is a non-crushing falling into the two rollers, can push the bearing compression spring to create a large gap to make the non-crushing thing through, after the non-crushing thing through, the spring can make the gap between the two rollers to maintain the original size, continue to work.
Techinical datas of double roller crusher:
| Model | Rotor size (mm) | Feeding size(mm) | Output size(mm) | Capacity (t/h) | Motor power(kw) | Weight (kg) |
| 2PG400*250 | 400*250 | ≤25 | 2-5 | 5-10 | 5.5*2 | 1500 |
| 2PG600*400 | 600*400 | ≤40 | 2-10 | 10-20 | 15*2 | 4500 |
| 2PG750*500 | 750*500 | ≤40 | 2-20 | 15-40 | 18.5*2 | 8900 |
| 2PG900*500 | 900*500 | ≤40 | 3-40 | 20-50 | 22*2 | 14000 |
Working site:
we can supply stone crusher production line, about customized details, Pls contact us!
You Might Also Like
118kw Water-Cooled 6 Cylinders Doosan Marine Diesel Engine/M......
White Porcelain Cosmetic Packaging Essential Oil Glass Bottl......
Must 2kVA to 5kVA Hybrid Solar Inverter Inbuilt MPPT with Wi......
Ceekie Wholesale Small Capacity Volume 25ml 35ml 50ml 75ml 1......
Used Shantui 220HP Rock Bulldozer SD22W China Second Hand Ch......
Turbo cartridge for Mini Cooper X EP6 CDTS N14 184 HP 116576......
8L Big Capacity Aluminum Pot Stainless Steel Electric Pressu......
Backpack for Women 2021 New Large Capacity Backpack for Wome......
Good Quality Warranty 1 Year 80W Ultraviolet Light with Dete......
Fleece Hard Nano a Polish Pad 150X15mm for Keda/Jcg /Bmr Nan......
Tieback Trimming D1006162
6mm Slot 15 Series China High Quality Industrial Aluminum Pr......