Products

DC Low Voltage Stepping Driver for Automatic Assembly

China DC Low Voltage Stepping Driver for Automatic Assembly, Find details about China Motor Driver, Stepping Driver from DC Low Voltage Stepping Driver for Automatic Assembly

Model NO.
5605S
Condition
New
Customized
Customized
Material
Stainless Steel
Name
Stepping Driver for Automatic Assembly
Trademark
Novotech
Transport Package
Green Export Package
Specification
CE, ISO9001, RoHS
Origin
China
HS Code
8503009090
Model NO.
5605S
Condition
New
Customized
Customized
Material
Stainless Steel
Name
Stepping Driver for Automatic Assembly
Trademark
Novotech
Transport Package
Green Export Package
Specification
CE, ISO9001, RoHS
Origin
China
HS Code
8503009090
DC Low Voltage Stepping Driver For Automatic Assembly
Can meet nema 11,14,17,24 stepper motor
DC Low Voltage Stepping Driver for Automatic Assembly
DC Low Voltage Stepping Driver for Automatic Assembly
DC Low Voltage Stepping Driver for Automatic Assembly
Note : All above is normally used, and we can customize according to your request or choose the suitable model for you.

Character
1.Operating voltage: DC24 to 50VDC, the max output peak current is 5.0A                   
2.Using flux linkage anti-resonance algorithm and electronic damping low-speed anti-vibration algorithm
3.Automatic identify of motor parameters and automatic adjustment of control parameters when power on
4.Built-in micro-step subdivision algorithm to achieve low-subdivision control instructions, high-subdivision operation results
5.Accept differential and single-end pulse / direction instructions
6.Pulse, direction compatible with enable signal interface level 4.5-28Vdc , no external current limiting resistor
7.Can set rising or falling edge, single pulse or double pulse and the motor initial direction through the serial port
8.The maximum pulse frequency of the control command is 500 kHz(Factory default is 200KHz)
9.Provide 15 positions of conventional micro-step subdivision set value,setting any subdivision from 200 to 51200 through the serial port.

Application
Novotech driver used in marking machine, cutting machine, laser phototypesetting, plotter, transmission power lines, automatic assembly and other equipments. It suitable for a lot of small and medium-sized automation equipments and instruments, has outstanding performance in the equipments that users expect small noise and high-speed.

Current setting
Output peak currentOutput RMS currentSW1SW2SW3
Default 1.4A[PK]ONONON
2.1A1.5AOFFONON
2.7A1.9AONOFFON
3.2A2.3AOFFOFFON
3.8A2.7AONONOFF
4.3A3.1AOFFONOFF
4.9A3.5AONOFFOFF
5.6A4.0AOFFOFFOFF

Half And Full Current Set SW4(idle)
If the driver does not receive the pulse command after 200ms, then it enter the idle mode, SW4 can set the current.
Current percentage as idle stateSW4 mode 
50%OFF
100%ON

Subdivision Setting
step/Rev.SW5SW6SW7SW8
DefaultONONONON
400OFFONONON
800ONOFFONON
1600OFFOFFONON
3200ONONOFFON
6400OFFONOFFON
12800ONOFFOFFON
25600OFFOFFOFFON
1000ONONONOFF
2000OFFONONOFF
4000ONOFFONOFF
5000OFFOFFONOFF
8000ONONOFFOFF
10000OFFONOFFOFF
20000ONOFFOFFOFF
25000OFFOFFOFFOFF
DC Low Voltage Stepping Driver for Automatic Assembly
DC Low Voltage Stepping Driver for Automatic Assembly





Packaging and shipping
1.Outer packing: Standard export carton with required shipping marks
2.Inner packing: Waterproof packing with shock absorbing EPE and cardboard surrounded 
3.As per the clients requirements

Our service
1.Working time : 8:00 a.m - 10:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 days will be OK. For mass production, the lead time depend on the quantities you need.
3.Warrantity period : 18 months and Life-long maintenance service for the product.
4.We accept products customize.

FAQ
Q1: How to choose the suitable stepper driver?
A1: Please tell us your stepper motor's model, we will choose the suitable one according to motor's model.

Q2: Any other methods to finalize the model?
A2: Sure, you can send us the model you are using, we can help you find the suitable one.

Q3:How to guarantee the Quality of Industrial Parts?
A3: We have the integrated system for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.

Q4:What's the Advantage of Your Parts for Industry Products? 
A4:1.The advantage of our products is the competitive prices, fast delivery and high quality. Our
employees are responsible-oriented, friendly-oriented,and diligent-oriented. Our products are featured by strict tolerance, smooth finish and long service time.
 2.Before we send out the goods,we check them more than three times.

Contact





 

You Might Also Like