About us:
China Nantong Mach's Composite Material Co., Ltd was established in 2005 and located in the Nantong City, Jiangsu Province, which is in the Yangtze River Delta business circle. Mach's owns 30,000 square meters land area, which includes 6,000 square meters plant area and currently has 130 professional employees. Mach's is an integrated manufacturer specializing in producing FRP grating and composite material. Our products include molded grating, pultruded grating, profiles, ladder, stair treads, clips and handrail systems.
During these years exploration and developing, Mach's has conformed to rigorous standards, including ISO9001, SGS, ASTM E84, ABS and some other certifications. As a certified enterprise, we own international quality management systems, and we have a number of advanced production lines and quality control systems. Mach's products have been acknowledged worldwide and we currently and mainly export to USA, Hong Kong, Japan, Southeast Asia, European, South Africa and other countries & regions. We have established long-term and stable relationships with our partners as the higher quality, faster delivery and better service.
We are dedicated to meeting our clients' needs and work towards our clients' highest expectations.
Pultruded process:
The pultrusion process previously described on page 3, is ideally suited for the manufacture of structural shapes. Analogous to the steel rolling process, this process allows structural shapes to be manufactured to length, only restricted by transportation limitations.
Continuous glass fibers that enter the process on the left are actually pulled the length of the process by a tractor (illustrated) or hand-over-hand pullers shown on the right. During the process, the glass bundle of continuous strands is wrapped with continuous strand mats that will provide the transverse strength. The entire reinforcement bundle is then pulled into a liquid resin bath (polyester or vinyl ester) and "wetted " out. The wetted reinforcement package is wrapped in a surfacing veil, which allows a resin-rich finish on the part, offering a first barrier to corrosion and a smooth finish. The completed package then goes into a performer that roughly forms the package into the appropriate shape to enter the heated die for curing. The die is the exact shape of the final part desired. Upon exiting the die, the part is over 90% cured and solid. The length of the part required is pulled through the cutoff saw and the process is complete.
Mach's Grating manufactures all standard shapes used for structural projects. They are manufactured in both vinyl ester (standard color is beige) and polyester (standard color is dark gray). Embedment angles are only manufactured in vinyl ester and standard in dark gray to compliment the color of concrete. Reference AGL's Availability List on the following page for a complete list of structurals provided.
Raw materials:
1.reinforcement material:fiberglass, glass mat, continuous strand mat, surfacing mat, needled mat.
2.basis material:unsaturated polyester resin, epoxy resin, vinylester resin.
our main raw materials suppliers:
suppliers certicfications can be provide as your requests
Our stock size:
| View/Example | Varieties Channel steel | Size(mm) A B t1 t2 | Weight(kg/m) |
| Channel steel | C50 | 50x14x3.2x3.2 | 0.44 |
| C76A | 76x22x6.4x6.4 | 1.31 |
| C76B | 76x25x4.8x4.8 | 1.06 |
| C76C | 76x38x6.4x6.4 | 1.7 |
| C102A | 102x27x3.2x3.2 | 0.91 |
| C102B | 102x29x6.4x6.4 | 1.37 |
| C102C | 102x29x6.4x6.4 | 1.78 |
| C102D | 102x35x4.8x4.8 | 1.48 |
| C102E | 102x44x4.8x4.8 | 1.65 |
| C120 | 120x50x5.0x5.0 | 2 |
| C150 | 152x41x8.0x8.0 | 3.28 |
| C152A | 152x42x6.4x6.4 | 2.72 |
| C152B | 152x42x8.0x8.0 | 3.35 |
| C152C | 152x42x9.5x9.5 | 3.95 |
| C152D | 152x50x8.0x8.0 | 3.59 |
| C203A | 203x56x6.4x6.4 | 3.68 |
| C203B | 203x56x9.5x9.5 | 5.34 |
| C254 | 254x70x12.7x12.7 | 8.9 |
| C210A | 210x55x5.0x5.0 | 2.95 |
| C210B | 210x80x5.0x5.0 | 3.42 |
| C210C | 210x85x5.0x5.0 | 3.52 |
| C120A | 120x25x5.0x5.0 | 1.52 |
| C120B | 120x30x5.0x5.0 | 1.62 |
| C120C | 120x40x5.0x5.0 | 1.81 |
Any customized sizes (length, thickness & demensions) are favorable as requested, please feel no hesitate to contact us for specific requirements.
Our QC systems:
our certicification:
ISO 9000 ABS Quality EvaluationsABS Design AssessmentABS Manufacturing AssessmentUL -94 V -0ROSHEN 13501+A1 Fire classificationNF P92-507 Fire safety-Building-interior fitting Material classification M1Anti-static FRP Pultrusion Profile SJ/T 10694 -2006Mechanics test D695-10 D790-10 ASTM D256-10 Method A ASTM D 732ASTM D634-14 D ASTM D953 -10 Procedure
copys can be provide as your requests
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) Test Methods:
1. ASTM D-638-Tensile Properties of Plastics
2. ASTM D-790-Flexural Properties of Unreinforced and Reinforced Plastics
3. ASTM D-2344-Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short Beam Method
4. ASTM D-696-Coefficient of Linear Thermal Expansion for Plastics
5. ASTM E-84-Surface Burning Characteristics of Building Materials
| Property | ASTM Method | Value | Units |
| Tensile Strength | D-638 | 30,000 (206) | psi (MPa) |
| Tensile Modulus | D-638 | 2.5 x 106 (17.2) | psi (GPa) |
| Flexural Strength | D-790 | 30,000 (206) | psi (MPa) |
| Flexural Modulus | D-790 | 1.8 x 106 (12.4) | psi (GPa) |
| Flexural Modulus (Full Section) | N/A | 2.8 x 106 (19.3) | psi (GPa) |
| Short Beam Shear (Transverse) | D-2344 | 4,500 (31) | psi (MPa) |
| Shear Modulus (Transverse) | N/A | 4.5 x 105 (3.1) | psi (GPa) |
| Coefficient of Thermal Expansion | D-696 | 4.4 x 10-6
(8.0 x 10 -6) | in/in/°F
(cm/cm/°C) |
| Flame Spread | E-84 | 25 or less | N/A |
Quality assurance:
A. All items to be provided under this Section shall be furnished only by manufacturers having a minimum of ten (10) years experience in the design and manufacture of similar products and systems. Additionally, if requested, a record of at least five (5) previous, separate, similar successful installations in the last five (5) years shall be provided.
B. Manufacturer shall offer a 3 year limited warranty on all FRP products against defects in materials and workmanship.
C. Manufacturer shall be certified to the ISO 9001-2000 standard.
D. Manufacturer shall provide proof of certification from at least two other quality assurance programs for its facilities or products (UL, DNV, ABS, USCG, AARR).
E. Manufacturer shall provide proof, via independent testing less than six months old, that materials proposed as a solution do not contain heavy metals in amounts greater than that allowed by current EPA requirements.
Pultruded profiles advantages:
1.superior corrosion resistence & optimal impact resistence & aging resistence.
2.anti-fire & waterproof
3.light weight & high strength
4.good dimension stability.
5.Nonconductive & Nonmagnetic & Low thermal conductivity
6.long service life & less maintenance cost.
7.easy to cut and install.
FRP U-channel application:
a).electrical&electronics markets
cable tray,radome,insulation ladder,etc.
b).Chemical anti-corrosion markets
grating floor, handrail, working platform, undergrand pression pipe, stairs,etc.
c).building construction markets
oversize bridge protection closed system,movable house structure,working platform,window frame, window sash and its components,etc.
d).foundation engineering markets
freeway antiglare shield and its handrail,lamp post,water treatment,bracket for huge industry cooling tower,etc.
Packing and delivery:
packing material:
1. Wood or steel pallets --easy to upload and download the cargo
2.PE wrapping film --keep grating clean and assure pallets stable
3. Bundling belts--assure pallets more stable
4. full cartons protection
Delivery inspection:
1. sales specifists checking quantity and quality of goods
2. IQC staffs spot re-inspect
3. checking packing and waybills
FAQ(frequent asked questions)
Q: what is available payment terms?
A: T/T & L/C
Q: is ODM & OEM available?
A: yes
Q: is customization favorable?
A: yes
Q: are samples availble?
A: yes, we provide stock samples. new molds are excepted
Q: what international commerical terms accept?
A: FOB, CFR & CIF
Q: how many days can receive bulk goods?
A: nomally 30 working days depends on logistics
Q: is there discount if bulk order?
A: yes, price can be negotiated if bulk order
Q: why choose machs?
A: Mach's is an integrated manufacturer specializing in producing FRP grating and composite material. Our products include molded grating, pultruded grating, profiles, ladder, stair treads, clips and handrail systems.
contact us:
address: 28 Longyou Road, Wuyao Town, Rugao City, Jiangsu Province, China, 226000
website: machsfrp.en.made-in-china.com
telephone: 001186-513-85302213
sales specifist: Ulya
contact number: 0086-18006291169
For more details, please refer to our website (machsfrp.en.made-in-china.com). Please also feel no hesitate to contact us if you have any further questions, we are dedicated to meet all our customers' needs and work towards our clients' highest expectations.