Solar Power Inverters 1kw 2kw 3kw 4kw 5kw 6kw Pure Sine Wave off Grid Solar Inverter

China Solar Power Inverters 1kw 2kw 3kw 4kw 5kw 6kw Pure Sine Wave off Grid Solar Inverter, Find details about China Solar Inverter, Solar Power Inverters from Solar Power Inverters 1kw 2kw 3kw 4kw 5kw 6kw Pure Sine Wave off Grid Solar Inverter

Basic Info.

Model NO.

HF2420U60-100

Wave

Pure Sine Wave

Rated Current

40A

Communication Interface

USB/ RS485(Bluetooth/WiFi/GPRS)/ Dry Node Control

Max Charging Current

40A

Max PV Open Voltage

100V

Max Power

2000W 3000W

PV Charging Current

0-60A

Trademark

HonorInsight or OEM

Transport Package

Carton Box with Foam Paper

Origin

China

HS Code

85044084

Model NO.

HF2420U60-100

Wave

Pure Sine Wave

Rated Current

40A

Communication Interface

USB/ RS485(Bluetooth/WiFi/GPRS)/ Dry Node Control

Max Charging Current

40A

Max PV Open Voltage

100V

Max Power

2000W 3000W

PV Charging Current

0-60A

Trademark

HonorInsight or OEM

Transport Package

Carton Box with Foam Paper

Origin

China

HS Code

85044084

Product Desciption

Solar Power Inverters 1kw 2kw 3kw 4kw 5kw 6kw Pure Sine Wave off Grid Solar Inverter

HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage &mains charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability, and high industrial standard.

Solar Power Inverters 1kw 2kw 3kw 4kw 5kw 6kw Pure Sine Wave off Grid Solar Inverter

Basic system introduction

The figure below shows the system application scenario of this product. A complete system consists of the following parts:
1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.
2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.
3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains are not connected.
4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans, and air conditioners.
5. All-in-one solar charge inverter: The energy conversion unit of the whole system. Specific system wiring method depends on the actual application scenario.

Solar Power Inverters 1kw 2kw 3kw 4kw 5kw 6kw Pure Sine Wave off Grid Solar Inverter

Solar Power Inverters 1kw 2kw 3kw 4kw 5kw 6kw Pure Sine Wave off Grid Solar Inverter

Models	HF2420U60-100		HF2430U60-100
AC mode
Rated input voltage	110/120Vac
Input voltage range	(90Vac~140Vac) ±2%
Frequency	50Hz/ 60Hz (Auto-detection)
Frequency Range	47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz);
Overload/short circuit protection	Circuit breaker
Efficiency	>95%
Conversion time (bypass and inverter)	10ms (typical)
AC reverse protection	Available
Maximum bypass overload current	40A
Inverter mode
Output voltage waveform	Pure sine wave
Rated output power (VA)	2000	3000
Rated output power (W)	2000	3000
Power factor	1
Rated output voltage (Vac)	120Vac
Output voltage error	±5%
Output frequency range (Hz)	50Hz ± 0.3Hz/60Hz ± 0.3Hz
Efficiency	>90%
Overload protection	(102% < load <110%) ±10%: report error and turn off the output after 5 minutes;(110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds;(Load >150% ±10%): report error and turn off the output after 5 seconds;
Peak power(W)	3000	4500
Loaded motor capability	1HP		2HP
Output short circuit protection	Circuit breaker
Bypass breaker specifications	40A
Rated battery input voltage	48V (Minimum starting voltage 44V)
Battery voltage range	Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery... settable on the LCD screen)
Power saving mode AC charging	Load ≤25W
Battery type	Lead-acid or lithium battery
Maximum charge current	30A
Charge current error	± 5Adc
Charge voltage range	40 -60Vdc
Short circuit protection	Circuit breaker and blown fuse
Circuit breaker specifications	40A
Overcharge protection	Alarm and turn off charging after 1 minute
PV charging
Maximum PV open circuit voltage	100Vdc
PV operating voltage range	30-100Vdc
MPPT voltage range	30-85Vdc
Battery voltage range	20-33Vdc
Maximum output power	1400W
PV charging current range (can be set)	0-60A
Charging short circuit protection	Blown fuse
Wiring protection Certified specifications	Reverse polarity protection
Certification	CE(IEC/EN62109-1
EMC certification level	EN61000, C2
Operating temperature range	-15°C to 55°C
Storage temperature range	-25°C ~ 60°C
Humidity range	5% to 95% (Conformal coating protection)
Noise	≤60dB
Heat dissipation	Forced air cooling, variable speed of fan
Communication interface	USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control
Size (LWD)	378mm280mm103mm
Weight (kg)	6.8

Wiring Specifications and Circuit Breaker Selection

Wiring and installation must comply with national and local electrical codes.
Recommended PV array wiring specifications and circuit breaker selection: Since the output current of the PV array is affected by the type, connection method and illumination angle of the PV module, the minimum wire diameter of the PV array is calculated according to its short-circuit current; refer to the short-circuit current value in the PV module specification (the short-circuit current is constant when the PV modules are connected in series; the short-circuit current is the sum of the short-circuit currents of all PV modules connected in parallel); the short-circuit current of the PV array shall not exceed the maximum input current.

Refer to the table below for PV input wire diameter and switch:

Models	Recommended PV wiring diameter	Maximum PV input current	Recommended air switch or circuit breaker type
HF2420U60-100	8mm2/8AWG	40A	2P-63A
HF2430U60-100	8mm2/8AWG	40A	2P-63A

Refer to the table below for recommended AC input wire diameter and switch:

Models	Recommended AC input wiring diameter	Maximum bypass input current	Recommended air switch or circuit breaker type
HF2420U60-100	8mm2/8AWG	40A	2P-63A
HF2430U60-100	8mm2/8AWG	40A	2P-63A

**Note: There is already an appropriate circuit breaker at the Mains input wiring terminal, so it is not necessary to add one more.

Recommended battery input wire diameter and switch selection:

Models	Recommended battery wiring diameter	Rated battery discharge	Maximum charge current	Recommended air switch or circuit breaker type
HF2420U60-100	25mm2/3AWG	100A	100A	2P-120A
HF2430U60-100	30mm2/2AWG	140A	100A	2P-160A

Recommended AC output wiring specifications and circuit breaker selection:

Models	Recommended AC output wiring diameter	Rated inverter AC output	Maximum bypass output current	Recommended air switch or circuit breaker type
HF2420U60-100	8mm2/8AWG	16.7A	40A	2P-63A
HF2430U60-100	8mm2/8AWG	25A	40A	2P-63A

**Note: The wiring diameter is for reference only. If the distance between the PV array and the all-in-one solar charge inverter or the distance between the all-in-one solar charge inverter and the battery is relatively long, using a thicker wire can reduce the voltage drop to improve system performance.

**Note: The above are only recommended wiring diameter and circuit breaker. Please select the appropriate wiring diameter and circuit breaker according to actual situations.