Ese Lightning Arrester /Lightning Rods
China Ese Lightning Arrester /Lightning Rods, Find details about China Lightning Rods, Surge Protectors from Ese Lightning Arrester /Lightning Rods
Basic Info.
Model NO.
OP-ESE
Shape
Gyro Type
Material
Brass
Certification
ROHS, ISO9001, CE, FCC, National Type Test
Brand
Opplei
Max Continuous Operating Voltage
≤70V
Max Discharge Current(Ka)
≥400ka
Total Height
663 mm
Weight Per Unit
3600g
Materials
Imported SUS304
Working Conditions
Temperature: -40 to 80oc
Standards Compliance
CE, FCC, RoHS, ISO9001
Strength of Wind Resistence
≤40m/S
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535400000
Model NO.
OP-ESE
Shape
Gyro Type
Material
Brass
Certification
ROHS, ISO9001, CE, FCC, National Type Test
Brand
Opplei
Max Continuous Operating Voltage
≤70V
Max Discharge Current(Ka)
≥400ka
Total Height
663 mm
Weight Per Unit
3600g
Materials
Imported SUS304
Working Conditions
Temperature: -40 to 80oc
Standards Compliance
CE, FCC, RoHS, ISO9001
Strength of Wind Resistence
≤40m/S
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535400000
Product Desciption
ESE Lightning Arrester
Model: OP-ESE
ESE Lightning Arrester Specification
Operating Principle:
OP-ESE3.3, OP-ESE4.3, OP-ESE5.3, OP-ESE6.3 series ESE Lightning arrester mainly absorbs and stores energy from electric field of natural world by its exciter; its reflector and Lightning Arrester needle point are in good electrical connection to the ground in an equipotential state. Under normal conditions, there exists electric-field strength between exciter and emitter; every time before lightning, electric-field strength will increase rapidly, the potential difference between exciter and reactor is approximately same as that between thundercloud and the earth; the rapid increase of voltage drop between them will cause strike fires at points and ionize the surrounding air of points thus forming point discharging phenomenon.
Air ionization of points due to the rapid increase of electric field between central collection rod and exciter of lightning arrester can discharge in extremely short and accurate time period; the existence of large amount of electricion will reduce the natural Corona effect, forming anticipated upward discharge channel to rapidly and safely intercept lightning and discharge current to the ground.
Product Features of ESE Lightning Arrester:
All lightning arrester are made of imported high quality stainless steel and for each type there is a different protection scope; Features are as below:
Application range of ESE Lightning Arrester:
High rise buildings, top of independent metal bar, wireless communication base station, warehouse of inflammables and explosives, chemicals, radar station, oil tank, meteorological observatory, military base, mine fields etc.
Advance time△T:
Suppose first start time of Lightning Arrester is ΔT, the forestall distance of upward leader ΔL=V*ΔT
As per the computing method from NFC-17-102 standard , Radius of protection RP can be computed as per below formula:
Rp= h(2D-h)+△L(2D+△L) (h≥5m)
D is electric shock distance, it is determined by the rank of protected architecture; for protection type I,II,III, D value is respectively 30m, 45m, 60m;
h is the height from top of lightning arrester to the protected plane
ΔT is evaluated, tested and computed to get V=106m/s
ΔL=V*ΔT
Technical Parameters:
ESE Lightning Arrester Installation Guide
The installation of lightning arrester must strictly follow National Lightning Protection Standards-"Building Lightning Protection Design Code":
1. To determine building lightning protection types, we need to follow the area, height of protected buildings, lightning strike times per day within the location, geographical environment correction coefficient and using properties of buildings;
2. To determine whether use one piece or multi piece lightning arresters as per lightning protection types and buildings area;
3. Downlead shall be electrically connected to the principal reinforcement of buildings, or make two or more downleads (downward conductor) as per standards;
4. Disconnect clip should be made to downleads (downward conductor) and insulation protection made to nearby ground.
5. Grounding body, ground resistance, lightning ground map shall be carried out as per National Lightning Protection Standards.
Notes
lCollision avoidance during carrying and lifting
lThe welding points should be fastness
lThe height of lightning rod and the earth connecting cable all should in accordance with national standards
Lightning Arrester Installation Diagram
Our Service
Prompt response: Any inquiries will be replied within 24 hours;
Professional manufacturer;
OEM/ODM available;
Fast after-sale Service:
1). All products will be strictly Quality Checked in house before packing;
2). All products will be well packed before shipping.
3). Five years warranty ,three years replacement;.
Standard packaging, and you can also tell us your own requirements on packaging;
Company Information
Shenzhen Opplei Technologies Co.,Ltd professional designs and manufactures highly reliable, industrial grade, TVSS (transient voltage surge supressors) surge protectors that guard sensitive equipment from damage. AC Power Line, Data Line, Low Voltage SPDs,lightning rods,Varistors.
*More than 10 years experience R&D teams so easy for product customized and get a fast after sale service .
*Have certification of CE FCC RoHS ISO9001,all product in accordance with the international standard IEC IEEE ect.
We are specialized in this field for decades,welcome to visit our factory .
Main products of OPPLEI:
Ac power surge protector and DC for solar pv system protection system;
Many kinds of signal surge protector for CCTV camera and communication system;
Antenna arrester,and some others earthing system device;
FQA:
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-10 working days for mass production after payment.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc
Q: Can I trust you?
A: Absolutely YES, We are "Made In China" verified supplier for many years.
Q: May I visit your factory?
A:Sure, welcome any time. We can also pick you up at airport or station.
Model: OP-ESE
ESE Lightning Arrester Specification
Operating Principle:
OP-ESE3.3, OP-ESE4.3, OP-ESE5.3, OP-ESE6.3 series ESE Lightning arrester mainly absorbs and stores energy from electric field of natural world by its exciter; its reflector and Lightning Arrester needle point are in good electrical connection to the ground in an equipotential state. Under normal conditions, there exists electric-field strength between exciter and emitter; every time before lightning, electric-field strength will increase rapidly, the potential difference between exciter and reactor is approximately same as that between thundercloud and the earth; the rapid increase of voltage drop between them will cause strike fires at points and ionize the surrounding air of points thus forming point discharging phenomenon.
Air ionization of points due to the rapid increase of electric field between central collection rod and exciter of lightning arrester can discharge in extremely short and accurate time period; the existence of large amount of electricion will reduce the natural Corona effect, forming anticipated upward discharge channel to rapidly and safely intercept lightning and discharge current to the ground.
Product Features of ESE Lightning Arrester:
All lightning arrester are made of imported high quality stainless steel and for each type there is a different protection scope; Features are as below:
- Non-electronic; long using life
- No change of protection quality after lightning
- Non-electronic system will not be damaged by surge shock
- Different models for different protection radius
- Safe and active lightning trigger system
- Only self-activate during lightning period
- Good looking appreance
- Wide range of protection scope
- Free maintenance for lightning protection system
- Exciter, reflector and central collection rod all are insulated
- Reflector and central collection rod are in good electrical connection to the ground
- Base of exciter are made of synthetic resin applicable to all types of corrosion
Application range of ESE Lightning Arrester:
High rise buildings, top of independent metal bar, wireless communication base station, warehouse of inflammables and explosives, chemicals, radar station, oil tank, meteorological observatory, military base, mine fields etc.
Advance time△T:
Suppose first start time of Lightning Arrester is ΔT, the forestall distance of upward leader ΔL=V*ΔT
As per the computing method from NFC-17-102 standard , Radius of protection RP can be computed as per below formula:
Rp= h(2D-h)+△L(2D+△L) (h≥5m)
D is electric shock distance, it is determined by the rank of protected architecture; for protection type I,II,III, D value is respectively 30m, 45m, 60m;
h is the height from top of lightning arrester to the protected plane
ΔT is evaluated, tested and computed to get V=106m/s
ΔL=V*ΔT
Technical Parameters:
| Name | Model | Advance time△T | Needle height | Main material |
| ESE Lightning Arrester | OP-ESE3.3 | 25µs | 663mm | 304 stainless steel |
| OML-ESE4.3 | 34µs | 663mm | 304 stainless steel | |
| OML-ESE5.3 | 43µs | 663mm | 304 stainless steel | |
| OML-ESE6.3 | 52µs | 663mm | 304 stainless steel |
| Type of protected building | ||||||||||||||||||
| height(m) | 5m | 6m | 7m | 8m | 10m | 15m | ||||||||||||
| Protected radius(m) | ||||||||||||||||||
| Models | ||||||||||||||||||
| OP-ESE3.3 | 40 | 55 | 62 | 40 | 56 | 65 | 41 | 57 | 66 | 41 | 58 | 70 | 41 | 61 | 73 | 42 | 63 | 81 |
| OP-ESE4.3 | 49 | 66 | 74 | 49 | 67 | 76 | 50 | 67 | 77 | 50 | 68 | 80 | 51 | 71 | 83 | 51 | 72 | 90 |
| OP-ESE5.3 | 59 | 76 | 85 | 59 | 77 | 86 | 59 | 77 | 88 | 59 | 78 | 90 | 60 | 80 | 92 | 60 | 82 | 99 |
| OP-ESE6.3 | 68 | 86 | 95 | 68 | 87 | 97 | 68 | 87 | 98 | 68 | 88 | 100 | 69 | 90 | 102 | 69 | 91 | 108 |
The installation of lightning arrester must strictly follow National Lightning Protection Standards-"Building Lightning Protection Design Code":
1. To determine building lightning protection types, we need to follow the area, height of protected buildings, lightning strike times per day within the location, geographical environment correction coefficient and using properties of buildings;
2. To determine whether use one piece or multi piece lightning arresters as per lightning protection types and buildings area;
3. Downlead shall be electrically connected to the principal reinforcement of buildings, or make two or more downleads (downward conductor) as per standards;
4. Disconnect clip should be made to downleads (downward conductor) and insulation protection made to nearby ground.
5. Grounding body, ground resistance, lightning ground map shall be carried out as per National Lightning Protection Standards.
Notes
lCollision avoidance during carrying and lifting
lThe welding points should be fastness
lThe height of lightning rod and the earth connecting cable all should in accordance with national standards
Lightning Arrester Installation Diagram
Our Service
Prompt response: Any inquiries will be replied within 24 hours;
Professional manufacturer;
OEM/ODM available;
Fast after-sale Service:
1). All products will be strictly Quality Checked in house before packing;
2). All products will be well packed before shipping.
3). Five years warranty ,three years replacement;.
Standard packaging, and you can also tell us your own requirements on packaging;
Company Information
Shenzhen Opplei Technologies Co.,Ltd professional designs and manufactures highly reliable, industrial grade, TVSS (transient voltage surge supressors) surge protectors that guard sensitive equipment from damage. AC Power Line, Data Line, Low Voltage SPDs,lightning rods,Varistors.
*More than 10 years experience R&D teams so easy for product customized and get a fast after sale service .
*Have certification of CE FCC RoHS ISO9001,all product in accordance with the international standard IEC IEEE ect.
We are specialized in this field for decades,welcome to visit our factory .
Main products of OPPLEI:
Ac power surge protector and DC for solar pv system protection system;
Many kinds of signal surge protector for CCTV camera and communication system;
Antenna arrester,and some others earthing system device;
FQA:
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-10 working days for mass production after payment.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc
Q: Can I trust you?
A: Absolutely YES, We are "Made In China" verified supplier for many years.
Q: May I visit your factory?
A:Sure, welcome any time. We can also pick you up at airport or station.
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle