Products

Polymethacrylate Pma Viscosity Index Improver Engine Oil Additive Manufacturer
Polymethacrylate Pma Viscosity Index Improver Engine Oil Additive Manufacturer

Polymethacrylate Pma Viscosity Index Improver Engine Oil Additive Manufacturer

China Polymethacrylate Pma Viscosity Index Improver Engine Oil Additive Manufacturer, Find details about China Viscosity Index Improver, Pma Viscosity Index from Polymethacrylate Pma Viscosity Index Improver Engine Oil Additive Manufacturer

Model NO.
T602HB
Production
Synthetic
Trademark
Chorus
Transport Package
Drum, IBC-Tank, ISO-Tank
Specification
Butyl Octyl Phenylamine
Origin
China
HS Code
3811
Model NO.
T602HB
Production
Synthetic
Trademark
Chorus
Transport Package
Drum, IBC-Tank, ISO-Tank
Specification
Butyl Octyl Phenylamine
Origin
China
HS Code
3811
Part I: Product Introduction
T602HB is a kind of the efficient viscosity index improver, and it is also the efficient pour point depressant for the lubricants with excellent performances. With a little dosage, this product can availably improve the viscosity index, and can also reduce the pour point at the same time. The product is transparently sticky liquid. And the dosage has no effect on the transparence of the oils. A little dosage of PMA can keep the performance of keeping the lower pout point durably. 

Part II: Application
Use in formulating aviation hydraulic oils, fluid drive oils, gear oils, transformer oils, hydraulic oils of low pour point, NC machine hydraulic oils, special hydraulic oils and internal-combustion engine oils and so on.

Part III: Recommended Dosage
The recommended dosage for 602HB is 0.5-8wt%, depending on the application. 
Please consult our additive application engineer for details.
Polymethacrylate Pma Viscosity Index Improver Engine Oil Additive ManufacturerPart IV: Physical & Chemical Index
ItemTypical ValuesTest Method  
AppearanceTransparent viscous liquidVisual inspection    
Flash Point(Open) ºC160                      GB/T3536                                  
Density(20ºC),kg/m³920SH/T 0604
100ºC Kinematic Viscosity, mm²/s3000GB/T265
Color scale and number0.50.5GB/T6540
Thickening Ability16SH/T0622 Appendix

Part IV: Product Performance
T602HB thickening performance in base oils of different viscosities(100°C kinematic viscosity)
T602HB Treat Rate60N150N350N
02.625.018.86
1%3.296.0710.75
2%3.96.9512.11

Part V: Packing & Storage
The highest temperature of this product shall not exceed 75°C during storage, handling and oil blending. If stored for a long time, the highest temperature shall not exceed 45°C. It shall be kept away from water. This product is non-flammable, non-explosive and non-corrosive. In terms of safety, environmental protection and use, it is the same as general petroleum products without special protection. For skin contact, wash thoroughly with detergent, soap and water.
Packing: 200L standard galvanized iron drum, 180 kgs/drum net weight.
Polymethacrylate Pma Viscosity Index Improver Engine Oil Additive Manufacturer
 

You Might Also Like