Products

Automatic Shrink Sleeve Wrapping Machine ( SSW -6040)

China Automatic Shrink Sleeve Wrapping Machine (SSW-6040), Find details about China Automatic Shrink Packing Machine, Sleeve Wrapping Machine from Automatic Shrink Sleeve Wrapping Machine (SSW-6040)

Model NO.
SSW-6040
Type
PE Shrink Film Machine
Heating Mode
Stainless Steel Heating
Packaging Material
Film
Product
Automatic Shrink Sleeve Wrapping Machine
Max Product Size
320(L)*150(W)*200(H)mm
Max Packing Capacity
up to 10 Ppm
Film
600mm(Width),30-100micro(Thickness)
Applicable Film
Polyethylene(PE)Film
Trademark
bowei
Transport Package
Export Wooden Case
Origin
Wenzhou
HS Code
84224000
Model NO.
SSW-6040
Type
PE Shrink Film Machine
Heating Mode
Stainless Steel Heating
Packaging Material
Film
Product
Automatic Shrink Sleeve Wrapping Machine
Max Product Size
320(L)*150(W)*200(H)mm
Max Packing Capacity
up to 10 Ppm
Film
600mm(Width),30-100micro(Thickness)
Applicable Film
Polyethylene(PE)Film
Trademark
bowei
Transport Package
Export Wooden Case
Origin
Wenzhou
HS Code
84224000
Automatic Shrink Sleeve Wrapping Machine

How it works

1.After filling, capping and labelling, product containers are then transported into the wrapping unit, by means of a side mounted conveyor.
2.Here, a pneumatic pusher collates the containers into a preselected pack formation, 
which upon completion is transferred forward into the welding position.
3.At this stage the pack is clamped, the welding bar descends to complete the wrap, 
and the pusher returns to prepare the next collation of product.
4. As the welding bar ascends the pusher advances to transfer the new collation into the welding position, at the same time displacing the previously wrapped collation onto continuously moving shrink tunnel conveyor.
5.The wrapped collation soon enters the shrink tunnel chamber where recirculated hot air causes the wrap to shrink, and tightly conform to the contours of the contents.
6.Once the pack is out of the hot chamber, forced air cooling is used to tighten the sleeve wrap to achieve a strong, secure pack ready for stacking on a pallet or placing in a shipping carton.
 
Automatic Shrink Sleeve Wrapping Machine (SSW-6040)
Automatic Shrink Sleeve Wrapping Machine (SSW-6040)
 
Automatic Shrink Sleeve Wrapping Machine (SSW-6040)
 
ModelSSW-6040
Power consumptionSleeve wrapper  220V/50-6-HZ/1phase
 Shrink tunnel    380V/50-60Hz/3phase
Max product size320(L)*150(W)*200(H)mm
Max Packing capacityUp to 10 PPM
Applicable FilmPolyethylene(PE)film
Film 600mm(width),30-100micro(Thickness)
Shrink tunnel2800mm(L), entrance 600(W)*400(H)mm
Shrink tunnel conveyorTeflon mesh belt conveyor
Air pressure≤0.5MPa(5 bar)
Weight(Approx)Shrink wrapper 220kgs
 Shrink tunnel  380kgs
OverallShrink wrapper 1200x1000x1800mm
 Shrink tunnel 3000x1200x1700mm

You Might Also Like