China Mikrotik Compatible Gpon SFP Ont/ONU 1.25g/2.5g 1310nm 20km, Find details about China Gpon ONU, Gpon Olt from Mikrotik Compatible Gpon SFP Ont/ONU 1.25g/2.5g 1310nm 20km
Parameter | Unit | Min. | Typical | Max. |
Storage Temperature | °C | -40 | 85 | |
Operating Case Temp for C-temp | °C | 0 | 70 | |
Operating Case Temp for I-temp | °C | -40 | 85 | |
Power Supply Voltage | V | 3.15 | 3.3 | 3.45 |
Supply Current | mA | 200 | 400 | |
Bit Rate for Tx | Gbps | 1.244 | ||
Bit Rate for Rx | Gbps | 2.488 |
Parameter | Unit | Min. | Typical | Max. |
Transmitter | ||||
TX Central Wavelength | nm | 1290 | 1310 | 1330 |
Spectral Width (-20dB) | nm | 1 | ||
Side Mode Suppression Ratio (SMSR) | dB | 30 | ||
Mean Launched Power | dBm | 0.5 | 5 | |
Mean Launched Power (TX Off) | dBm | -45 | ||
Extinction Ratio | dB | 10 | ||
Optical Return Loss Tolerance | dB | -15 | ||
Transmitter and dispersion Penalty | dB | 1 | ||
Transmitter Mask (PRBS223-1@1.244G) | Compliant With ITU-T G984.2 | |||
Receiver | ||||
Receive Wavelength | nm | 1480 | 1490 | 1500 |
Sensitivity (PRBS223-1@2.488G, ER=8.2, BER<10-10) | dBm | -28 | ||
Overload (PRBS223-1@2.488G, ER=8.2, BER<10-10) | dBm | -8 | ||
Loss of signal De-assert Level | dBm | -29 | ||
Loss of signal assert Level | dBm | -39 | ||
LOS Hysteresis | dB | 0.5 | 6 | |
WDM Filter isolation to 1441 nm ~1450 nm,1530 nm ~1539 nm | dB | 25 | ||
WDM Filter isolation to 1250 nm ~1441 nm,1539 nm~ 1625 nm | dB | 36 | ||
Electrical Interface Characteristics | ||||
Data Input Swing Differential/TX | mV | 200 | - | 2000 |
Data Output Swing Differential/RX | mV | 400 | 1600 | |
Date Differential Impedance | Ω | 90 | 100 | 110 |
LVTTL Output High | V | 2.4 | Vcc | |
LVTTL Output Low | V | 0 | 0.4 | |
LVTTL Input High | V | 2.0 | Vcc+0.3 | |
LVTTL Input Low | V | 0 | 0.8 | |
Timing Characteristics | ||||
Turn On Time at Burst mode (TON) | ns | 12.8 | ||
Turn Off Time at Burst mode (TOFF) | ns | 12.8 | ||
TX-SD Assert Time (TTXSD_ON) | ns | 100 | ||
TX-SD De-assert Time (TTXSD_OFF) | ns | 100 | ||
LOS Assert Time (TLOSA) | us | 100 | ||
LOS De-assert Time (TLOSD) | us | 100 |
Pin No. | Symbol | Level / Logic | Description |
1 | VeeT | Module Transmitter Ground | |
2 | Tx_Fault | LVTTL-O | Module Transmitter Fault |
3 | Tx_Burst | LVTTL-I | Transmitter Burst Control, D23446-SSC(H)A active low for transmitter on D23446-SSC(H)B active high for transmitter on |
4 | SDA | LVTTL-I | 2-Wire Serial Interface Data Line |
5 | SCL | LVTTL-I/O | 2-Wire Serial Interface Clock |
6 | MOD_ABS | LVTTL-O | Module Absent, connected to ground in the module |
7 | TX_SD | LVTTL-O | Tx Signal Detect, active high when transmitter on |
8 | RX_LOS | LVTTL-O | Loss of Receiver Signal Indication |
9 | NC | ||
10 | VeeR | Module Receiver Ground | |
11 | VeeR | Module Receiver Ground | |
12 | RD- | CML-O | Receiver Inverted Data Output, AC-coupled |
13 | RD+ | CML-O | Receiver Non-Inverted Data Output, AC-coupled |
14 | VeeR | Module Receiver Ground | |
15 | VccR | Module Receiver 3.3V Supply | |
16 | VccT | Module Transmitter 3.3V Supply | |
17 | VeeT | Module Transmitter Ground | |
18 | TD+ | LVPECL-I | Transmitter Non-Inverted Data Input, DC-coupled |
19 | TD- | LVPECL-I | Transmitter Inverted Data Input, DC-coupled |
20 | VeeT | Module Transmitter Ground |
Ordering P/Ns | Description |
L LAGU-T31S-20B+(C) | GPON SFP ONU, B+,1.244Gbps Tx 1310nm, 2.488Gbps Rx 1490nm, TX_Burst signal high active transmitter on, SFP form-factor, SC/UPC receptacle connector, Commercial temperature |
L LAGU-T31S-20B+(I) | GPON SFP ONU, B+,1.244Gbps Tx 1310nm, 2.488Gbps Rx 1490nm, TX_Burst signal high active transmitter on, SFP form-factor, SC/UPC receptacle connector, Industrial temperature |