Rh-A300-Oms-520 Fixed on Mutltiple Ropes Elevator Overload Measuring System
China Rh-A300-Oms-520 Fixed on Mutltiple Ropes Elevator Overload Measuring System, Find details about China Wds-Mr300, Cable Measuring Device from Rh-A300-Oms-520 Fixed on Mutltiple Ropes Elevator Overload Measuring System
Basic Info.
Model NO.
OMS-520-RH-A300
Suitable Wire Rope Dia
6-16mm
Input Resistanced Under Car
760+/-10 Ohm
Output Resistance
700+/-2 Ohm
Safe Overload
150% F.S.
Ultimate Overload
200% F.S.
Construction
Aluminium Alloy
Cable
2.5m
Connector
4 Blank Wire
Control Unit
Oms-520
Structure Method
Split Type
Relay Number
4 Output
Display Type
4 Digits 0.56 Inch LED
Display Mode
Weight/Percentage
Operation Voltage
AC/DC 24V
Trademark
SUMMIT
Transport Package
1set/Carton, 4sets/Carton
Specification
44X33X32cm, G. W.: 21kg
Origin
Zhejiang, China
HS Code
8431310001
Model NO.
OMS-520-RH-A300
Suitable Wire Rope Dia
6-16mm
Input Resistanced Under Car
760+/-10 Ohm
Output Resistance
700+/-2 Ohm
Safe Overload
150% F.S.
Ultimate Overload
200% F.S.
Construction
Aluminium Alloy
Cable
2.5m
Connector
4 Blank Wire
Control Unit
Oms-520
Structure Method
Split Type
Relay Number
4 Output
Display Type
4 Digits 0.56 Inch LED
Display Mode
Weight/Percentage
Operation Voltage
AC/DC 24V
Trademark
SUMMIT
Transport Package
1set/Carton, 4sets/Carton
Specification
44X33X32cm, G. W.: 21kg
Origin
Zhejiang, China
HS Code
8431310001
Product Desciption
SUMMIT/ANT Split type rated load 4500kg RH-A300-OMS-520 fixed on mutltiple ropes elevator overload measuring system On wire rope load weighing devvice:OMS-520-RH-A300
Very simple installation with no mechanical modification Simple solutions for modernization with no impact on the existing regulated travel parameters, The sensors are protected against overload and provided with clamps which protect against
cable damage and slippage.
The multiple wire rope clamping load weighing device RH-A-OMS-520 consists of one rope tension sensor RH-A and a control unit OMS-520, and the rope sensor is available for mounting to cables between 8mm and 16mm in diameter, and clamp on multiple ropes from 2-10 pcs rope depending on the rope space, diameter and so on. This solution covers the wide load range 500 to 4500kg per cable(roping 1:1), .calibration is auto-matic and no test weights are required. It's perfect for modernization as well as for new installations.
Features:
- High sensitivity for rope sensors
- Clamp on the multiple wire ropes
- Suitable for wire ropes from 8 to 16 mm diameter.
- Separate type installation and easy maintenance
- Fast and easy installation, especially ideal for modernization
- Operating capacity up to 9000 kg for 2:1 roping (18000 kg for 4:1 roping)
- Protection with broken and loose rope alarm function output
- Cabin weight state display indicator is available ( optional)
Split type load weighing device: OMS-520-RH-A100
Clamped at multiple wire ropes: Elevator overload measurement device:
- OMS-520-RH-A100
- OMS-520-RH-A200
- OMS-520-RH-A300
| Wire rope tension load sensor : | RH-A100 | RH-A200 | RH-A300 |
| Operation capacity | 3000kg | 3000kg | 5000kg |
| Wire rope diameter | 6-16mm | 6-16mm | 6-16mm |
| Sensitivity | 2.0±0.02%mV/V | 2.0±0.02%mV/V | 2.0±0.02%mV/V |
| Excitation voltage | 5-12VDC | 5-12VDC | 5-12VDC |
| Input impedance | 760±10Ω | 760±10Ω | 760±10Ω |
| Output impedance | 700±2Ω | 700±2Ω | 700±2Ω |
| Insulation impedance | ≥5000MΩ | ≥5000MΩ | ≥5000MΩ |
| Safe overload ratio | 150%F.S | 150%F.S | 150%F.S |
| Ultimate overload | 200% F.S | 200% F.S | 200% F.S |
| Total error | ±0.5%F.S | ±0.5%F.S | ±0.5%F.S |
| Material | Aluminum alloy | Aluminum alloy | Aluminum alloy |
| Creep error | ±0.02% F.S. | ±0.02% F.S. | ±0.02% F.S. |
| TC SPAN | ±0.02%F.S/10ºC | ±0.02%F.S/10ºC | ±0.02%F.S/10ºC |
| Working temperature | -30ºC~+70ºC | -30ºC~+70ºC | -30ºC~+70ºC |
| Protection class | IP68 | IP68 | IP68 |
| Cable length | 2.5m | 2.5m | 2.5m |
| Control unit model: | OMS-520 | ||
| Operation Voltage: | AC/DC16-48V | Signal hold voltage: | AC/DC10-45V |
| Nominal power: | ≤4W | Voltage analog output: | 0V~+10V |
| Load cell channel: | 1 | Current analog output: | 4mA-20mA(optional) |
| Relay Number: | 4(overload,full load,half load, no-load) | Sensor operation voltage: | DC5V |
| Contact Load: | 1A125VAC,2A 30VDC,5A 250VAC/5A 30VDC | Measuring precision: | 0.1% |
| Display Type: | 4 digits 0.56 inch LED display | Operation temperature: | -45degree-+85degree |
| Display mode: | Weight/percentage | Size: | 90X77.5X59mm |
| Key numbe:r | 6 | Weight: | 270g |
Fixed at the mutltiple wire rope dead head:
Wiring diagram:
methods like rope hitch installation, under car platform installation, crossbeam installation, clamping on traction rope installation in order to offer a safe and comfortable elevator running status.
Universal device for working with different load cells:
- Under cabin floors:UC-AP-OMS-560
- Clamping on wire rope:RH-SM-OMS-560
- Fixed at crosshead beam :RHP-X-OMS-560
- Between the wire rope hitch plate:RHP-E-OMS-560
You Might Also Like
Fashion Women Magic Tools Foam Sponge Device Quick Messy Don......
Auto / Car Spare Parts Suspension Strut Mounting for Toyota ......
Portable USB Mini Rechargeable USB Fan Lithium Battery Fan
Walmart Pant Hanger, Popular Child Plastic Bottom Hanger
Monobloc Filler and Capper for Gel Antiseptic Handwash
Car Accessories Air Assembly Spring Shock Absorber for Porsc......
Indoor Pantallas -Advertising Full Color LED Video P4.81 Pan......
Diesel Engine Rotary Screw Air Compressor for Sandblaster
Promotional 1oz Neoprene with Carabiner Hand Sanitizer Holde......
51002 Ariste New Design 7PCS Plastic Craft Clay Green Model ......
Paper Shopping Bag with Logo Wholesale