Products

Yx300 Cold Rolling Mills for Ridge Cap

China Yx300 Cold Rolling Mills for Ridge Cap, Find details about China Tile Machine, Rolling Machine from Yx300 Cold Rolling Mills for Ridge Cap

Model NO.
YX300
Usage
Roof, Wall, Floor
Transmission Method
Motor Drive
Thickness
0.4mm--0.8mm
Yield Strength
550MPa
Trademark
LIMING MACHINERY
Transport Package
40gp*1
Specification
13T
Origin
Fujian, China (Mainland)
Model NO.
YX300
Usage
Roof, Wall, Floor
Transmission Method
Motor Drive
Thickness
0.4mm--0.8mm
Yield Strength
550MPa
Trademark
LIMING MACHINERY
Transport Package
40gp*1
Specification
13T
Origin
Fujian, China (Mainland)
YX300 COLD ROLLING MILLS FOR RIDGE CAP

Yx300 Cold Rolling Mills for Ridge Cap

Material:     Material thickness: 0.4~0.6mm
Effective width: 373.7±5 mm
Feeding width: 470mm
Pre-painted coil, Yield strength: 550Mpa

Machine Components

a. 3TonX600mm Hydraulic Un-Coiler
Hydraulic system for expansion coil-inner-hole with 4 palms;
Link-connect expanding system
Pump power=1.5KW;
Drag off turning type
Load capacity=3 Ton;Coil Inner - diameter =451-530 mm
Coil outer-diameter=Max. 1500 mm
Coiler Width=Max. 600 mm
Yx300 Cold Rolling Mills for Ridge Cap


b. Entry Bench & Manual Pre-shearing device (Un-powered)           
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.8mm

c. Cold Rolling Mills
Feeding section with guide;
Wall plate frame design
Gear/Sprocket driving;14-step to form
Rollers manufactured from 45 # steel, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =5.5 KW, Frequency speed control
Max line forming speed for roll former:15m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
Yx300 Cold Rolling Mills for Ridge Cap

d.Hydraulic Cutting Device
Stop to cut, No Blanking cut
Pump motor =4KW
Cutting tool material: Cr12, Heat treatment
Yx300 Cold Rolling Mills for Ridge Cap

e. PLC Control System
Control the quantity & cutting length automatically.
Combined with: PLC, Touch Screen (Siemens), Inverter(Schneider), Encoder (Omron), etc
Cut-to-length tolerance≤±2.0 mm
Control voltage 24V

Product Rack            Un-powered, 3 units




Yx300 Cold Rolling Mills for Ridge Cap

Yx300 Cold Rolling Mills for Ridge Cap
 
                                                              After-Sale Service
 
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free.
The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.

                                                              Terms Of Trade
 
Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required
before the machine be send out of factory.

You Might Also Like