HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder

China HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder, Find details about China Geomembrane Welding Machine, PE Plastic Extrusion Welding Gun from HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder

Model NO.
GW600
Power
Electric
Trademark
OBOR
Transport Package
Aluminium  Packing Box
Specification
GW800,
Origin
Taian, Shandong, China
HS Code
8515809090
Model NO.
GW600
Power
Electric
Trademark
OBOR
Transport Package
Aluminium  Packing Box
Specification
GW800,
Origin
Taian, Shandong, China
HS Code
8515809090
       Geomembrane Extrusion Welding Machine-GW600
 1.Geomembrane Welding machine description:
This geomembrane extrusion welder is the first one in China that has functions of double independent heating systems, digital display controller, 360-degree rotating welding head, motor cold start protection,  which is applicable to welding PE,PP,PVDF and other hot melt materials.
HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder2.Geomembrane Welder Technical parameter:
 
Voltage220 V ± 5%
Frequency50/60Hz
Metabo Extruding Power1100W
Hot Air Power1600W
Welding Rod Heating Power800W
Air Temp20-600°c Adjustable
Extruding Temp200-300°c Adjustable
Welding Speed 2.5Kg/h
Welding Rod DIA3.0mm-4.0mm
Weight7.0Kg
ApplicationPP PE

3.Main componentsHDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder
HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder
 
4.Operation procedures

1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
2) Open the control box switch, welding temperature is generally set at 300 ° C, when the temperature reach 270 ° C, the motor switches off, you can not start, when the temperature reaches 270 ° C, the motor switch is turned on, you can start properly. Open the hot air machine power switch, thermostat knob, heated a few minutes to operate.

(3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth, and the internal sound disappears after sending welding rods.
4) It is better to re-standby 5 to 6 minutes after ensuring the motor can be started.Then put welding rod into machine to operate. Adjust the temperature  carefully depending on the thermoplastic case.
5)Motor's rotating speed is fast without thermoplastic and will become heavier when sending welding rod, if become very difficult, please stop, probably screw heating time is too short or low temperature.

5.Package:

HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners WelderBox Size: 5
85mm×500mm×190mm

Weight: 13kg
6.Application
HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder
 
HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder
Shandong OBOR New Materials Co., Ltd
Taian. Shandong. China