1.Packing List
61x61CM LED Dynamic Dance Floor 1 pcs
User Manual 1 pcs
2. Product Features
Multiple display modes
Wealth effect, support 7 * 99 kinds of dynamic effects
Aperture effect, 3D dynamic
Use for Both Indoor and Outdoor
3. Schematic Diagram
61x61CM LED Dynamic point tiles 5
4. Specifications
Item NO. RG-DDF34S305-V4
LED Qty 528 pcs 5050 lamp beads
Pixels dots 4 dot
Light ring Number of turns 16
Rated Power 66W
Input Voltage AC 100-240V 50/60Hz
Working life 50000Hrs
Gray Level 256
Control mode
SD card control box (with SD card), computer
(optional), DMX (optional), voice (optional), audio
control (optional), remote control (optional)
DMX Channels 6CH
Mode Quantity 7
Quantity of effect 99
Noise 50dB
Radiating the way Natural Convection
Dimensions 610x610x64mm
Net weight 10.7kg
main material Acrylic + ABS
Body color White panel + black chassis
Ambient temperature -20ºC~+40ºC
Environment IP65
61x61CM LED Dynamic point tiles 6
5. Installation Method
5.1 Installation Steps
Please put the floors in the appropriate position (If work in outdoor environments, do waterproof
treatment).
Please install all the floors in accordance with the expected size. Follow the principle of male -in&
female-out. Connect all signal and power cables one by one &end to end. Please see related picture to
ensure proper operation. After arrangement, the signal goes to the main controller; and power goes to
Switch. Then turn on the power.
5.2 DMX Linking
When using a DMX controller to control one dynamic Master box or multiple dynamic master boxes,
you need to use Grade connection with Signal cable between them. And make sure the DMX OUT port
of first dynamic master box should be connected to DMX IN port of the next one
Notice: the length of signal cables should be within 100meters, to prevent the signal interference by
other appliances because of the long signal cables.
5.3 AC Power
The fixture is designed to work on 100-240V 50/60Hz.Before applying turn on power,
Please double check the source voltage matches the unit's requirement
6. Safety Instructions
We've put the device in advance transferred intact state. In order to maintain this condition and
ensure safe operation, the user absolute requirement to comply with the safety instructions and
warnings written in terms of manual species.
Important Notice: Due to neglect this manual caused damage within the scope of our responsibility.
Dealer is not responsible for failures and problems arising therefrom.
If the device is placed in the intense temperature fluctuation environment, (egg after transportation),
do not open the machine immediately. Or easy to make water vapor condensation and damage to
equipment, Better to wait until equipment to reach room temperature before opening state
This device is Class 1 protection equipment; make sure the power lines are grounded.
Confirm compliance with internal operating voltage at a predetermined voltage
61x61CM LED Dynamic point tiles 7
Make sure the power cord is not curled or scratched by a sharp object, and regular inspection of
equipment and power lines.
When the device is not in use or before cleaning the device, unplug the power cord. Hand pulls the
plug, not directly pull the power cord.
Note: In operation Process, Outer Shell Become Too hot.
Do not tampered with the device, the device does not warranty.
Do not allow children or non-professionals close to the equipment.
7. Operation Instruction
The Product is designed for professional venues, such as in the stage, disco, theater, etic Use.
Light efficiency design is not permanent operation; intermittent use can ensure long-term stable
and trouble-free use.
Do not brute force to install or operate the equipment.
When selecting an installation location, make sure the device is not exposed to extreme heat,
humidity or dusty environments species, and around No other wire, to ensure the safety of
themselves and others.
Before operating the device, check good outer shell whether loose, all screw whether twist tight.
Air temperature must not exceed the maximum specified temperature.
Please read the instructions carefully and strictly in accordance with the operating instructions,
non-professional operation will lead to the product can't function properly. By the analysis, most of
the damage caused by improper operation
Such as floor tiles need transportation, please use the original packaging.
For security reasons, we do not allow unauthorized modification of floor tiles.
Do not tear ground brick the serial number; otherwise it will cause the warranty void.
Improper operation may lead to product damage and lead to guarantee acceptance is invalid. In
addition, not in accordance with the instruction ns may cause danger, such as short circuit, fire,
electric shock, impact, etc.
8. Maintenance and cleaning
The operator must confirm acceptance testing period should be professionally inspected and
related safety equipment and machine technical installations.
The operator must confirm every year by a skilled technician to inspect the safety-related
equipment and machine technical installations.
The following points must be noted during the inspection:
All equipment used for mounting screws must be tightened and free of wear and corrosion.
In the case shell, installation, installation without any damage.
There should be no damage of the power cord, metal fatigue (such as the perforated line) or
sediment. Must be installed by experienced personnel in accordance with the different installation
site and use to give additional guidance. Potential safety hazard must be eliminated.
61x61CM LED Dynamic point tiles 8
Dan ger! High Voltage! Danger to life!
Before starting maintenance operations, please disconnect the power supply!
We recommend regular cleaning of equipment. Please use a wet hemp cloth clean, do not use
alcohol or an organic solvent for cleaning.
Responsible for maintenance and repair operations only by authorized dealers.
If you need replacement parts, please use the original accessories.
If the power cable is damaged, in order to avoid danger, to be replaced by authorized dealers.
If you have any questions, please contact your local dealer.
9. Panel Explanation
9.1 Front Panel Description
Insert an SD card
And open machine give ground brick
write address 01-20
1-8 corresponding to the SD card
control box 8 outputs
Auto: Adjust the volume, the smaller the value the
more sensitive
Speed: Speed adjustment, the greater the value the
more slowly
Mode+: Effects + / to select the next effect
Mode-: Effects - / Select the previous effect
Control box to open the key
61x61CM LED Dynamic point tiles 9
9.2 Rear panel Explanation
9.3 Address
This function is used to set the floor starting DMX address. After Electricity, it automatically edit
address for each controlled by DMX device has a starting address.DMX function is to guarantee the
normal addressing. The floor tile can be controlled by DMX device after setting the address. However,
DMX address will also allow floor ignore messages from any DMX controller. And have the function of
power lost to keep to this address, don't repeat Settings.
Master-slave master class networking line interface, for
more than 8 outputs circumstances
Audio: Audio Interface, Antenna: Antenna hole
DMX input and output, multiple master of DMX cascade
The lord control box the eight outputs
Power input: AC110-220V
61x61CM LED Dynamic point tiles 10
9.4 Manual mode
This pattern includes seven modes, in this mode you can manually set up brick blending effect and
save.