Products

Virgin and Recycle TPU Raw Material / TPU Resin / TPU Granule for Film

China Virgin and Recycle TPU Raw Material / TPU Resin / TPU Granule for Film, Find details about China TPU Materials, TPU Granular from Virgin and Recycle TPU Raw Material / TPU Resin / TPU Granule for Film

Model NO.
Shore A 80 to 95A
HS Code
39269090
Model NO.
Shore A 80 to 95A
HS Code
39269090

Virgin and Recycle TPU Raw Material / TPU Resin / TPU Granule for Film

Specifications:
TPU granules, hardness, including: 80A/85A/90A/95A.

Features:
Normally including two categories: Polyester and polyether.
Hardness Shore 60A-72D.

Performance:
FDA certification;
Non-toxic, anti-wear ability (more wear than the POM and nylon), soft, high, silence, similar than the hardness of the rubber has a higher modulus of elasticity;
Good resistance to oil, hydrolysis, anti-UV (ozone), small swelling in non polarity solvent and fuel;
Good weather resistance (low temperature flexibility), without plasticizer; It can be dyed with good air permeability and moisture permeability;
TPU thermoplastic elastomers, high tension, high tensile, tough wear-resistant characteristics of aging, as strong of fiber products.

Processing methods:
Suitable for injection molding, blow molding and extrusion molding and other processing methods.

Application:
For all types of products such as shoes, industrial casters, hose, cable sheathing, film, advanced accessories, medical equipment and sports equipment.


Physical Properties		Testing
method		 
unit		E480AE485AE490AE495AE498AE464DE472D
 
Specific Gravity		 
 
 		1.21 ± 0.021.22 ± 0.021.22 ± 0.021.22 ± 0.021.23 ± 0.021.24 ± 0.021.25 ± 0.02
 
Hardness
 		ShoreA
ShoreD		80 ± 385 ± 390 ± 395 ± 3 
55 ± 3		 
64 ± 3		 
72 ± 3
 
100!%Modulus
 		Kg/cm2507090110150180220
 
Tensiles Strength
 		Kg/cm2350380400450450500550
 
Elongation at break
 		0/0500450450420400350320
 
Tear Strength
 		Kg/cm28595105125150180200
70 degree permanence
Compression Set
 		0/03235384045
 
 
 
Abrasion Loss
 		Mg30323540506060
PolyolPolyester ( Normal Polyester )   Anti-Temperature : -30 degree  -80 degree 
Testing Condition   Pull Strength Testing: extruding and forming 2mm trial sheet, after 100degree *16 heating and then testing.
Abrasion: Tober abrasion Wheel H-22, Weight 1kgs, Turning 1000 Circles 
*Above data just for Reference.   

You Might Also Like