Products

Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner

China Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner, Find details about China Silicon Carbide, Sic Spigot from Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner

Use
Wear Resistance
Technique
Sintering Reaction Bonded
Trademark
None
Transport Package
Ply-Wood CTN
Specification
660x600x450mm
Origin
China
HS Code
69091200
Use
Wear Resistance
Technique
Sintering Reaction Bonded
Trademark
None
Transport Package
Ply-Wood CTN
Specification
660x600x450mm
Origin
China
HS Code
69091200

Sic silicon carbide abrasion resistant hydrocyclone Lining Parts RBSic Cyclone Rubber Liner
Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber LinerSic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber LinerSic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber LinerSic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber LinerSic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner


 Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber LinerSic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner

Hydrocyclone Lining Parts Is The Most Important Part Of The Whole Hydrocyclone. Because The Hydrocyclone Deals With Solid-Liquid Mixture Medium, Its Wear On The Hydrocyclone Is Quite Strong. Therefore, Wear-Resistant Lining Is Needed To Protect The Normal Operation Of The Cyclone. After a Period Of Work, The Lining Needs To Be Replaced. So The Wear-Resistant Linings Produced By Our Company Can Be Better Applied To The Whole Replacement Parts Of The Cyclone.
 

Cyclone Lining Parts Material:

1, Wear Resistant Rubber
2, Polyurethane
3, Silicon Carbide Ceramics
 

Cyclone Linings Can Be Divided Into:

1, Spigot
2, Vortex Finder
3, Cone Lining
4, Cylinder Top Lid
5, Cylinder Lining Feeding

But In General, Silicon Carbide Ceramics And Polyurethane Materials Are Very Hard, So They Are Usually Bonded Directly To The Inner Surface Of Hydrocyclones. Although It Can Be Replaced, It Takes a Lot Of Time. If It's Easy To Replace. We Usually Use Wear-Resistant Rubber Linings, Which Are Easy To Replace. Take Off The Old Rubber Lining And Install The New One.

In Addition, For Some Small-Sized Cyclones, Pure Polyurethane Materials Can Be Used, Without The Need For Steel Skeleton To Provide Pressure.

In Addition, The Hydrocyclone Rubber Lining Parts Is Also Our Company's Main Products. At Present, The Maximum Is FX 838 FX 660. But The Dust Nozzles Of Hydrocyclones Are Usually Made Of Silicon Carbide Ceramics.


Advantages:
- Excellent wear and abrasion protection property.
- Excellent corrosion resistance property
- Excellent heat resistance property
- Excellent impact resistance property
- Excellent for ballistic protection

Applications:
- Mining
- Mineral processing (mineral beneficiation)
- Power generation
- Cement
- Petro-Chemical Refining and Production
- Coal washery
- Steel
- Defense (personal & vehicle armour).
 

Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner
 
 Specifications:
 Item Unit Data
 Temperature of application  ºC1380ºC 
 Density G/cm3 >3.05
Open porosity  % <0.1
 Bending strength -A Mpa 250 (20ºC)
 Bending strength -B MPa 280 (1200ºC )
 Modulus of elasticity-A GPa  330(20ºC)
 Modulus of elasticity -B GPa300 ( 1200ºC ) 
 Thermal conductivity W/m.k 45 (1200ºC )
 Coefficient of thermal expansionK-1 ×10-6   4.5
 Rigidity / 13
 Acid-proof alkaline / excellent
 

Technical Datas of Steel : 

Q235 steel plate for Normal Chemical Analysis (%):

Cr

C

Mn

Si

Other

24%-30%

4%-5%

0.5%-2.5%

0.5%-1.5%

Less than 2%

 
 Available Shape and sizes:

Thickness: from 6mm up to 25mm 
Regular Shape: SiSiC tiles, SiSiC Pipe tiles, SiSiC Three Links, SiSiC Elbow, SiSiC Cone Cyclone. 
Remark: Other sizes and shape are available upon requests. 

 Packaging: 
In carton box, packed in fumigated wooden pallet with net weight 20-24MT/20′FCL.
 
Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner
Packing:
Sic Silicon Carbide Abrasion Resistant Hydrocyclone Lining Parts Rbsic Cyclone Rubber Liner

You Might Also Like