Sand and Fly Ash AAC Block Making Machine

China Sand and Fly Ash AAC Block Making Machine, Find details about China Block Making Machine, Block Machine from Sand and Fly Ash AAC Block Making Machine

AAC Line Working Ways
Total Automatic
AAC Line Material
Building Waste, Tailings, Fly Ash, Sand, etc
Oversea Office
India, Indonesia, Iran etc.
After Service
Oversea Service with Professional Team
Project Service
Raw Material Test, Training , Performance Test
Total Plant
400+ Plants
Trademark
KEDA
Origin
China, German Technology
AAC Line Working Ways
Total Automatic
AAC Line Material
Building Waste, Tailings, Fly Ash, Sand, etc
Oversea Office
India, Indonesia, Iran etc.
After Service
Oversea Service with Professional Team
Project Service
Raw Material Test, Training , Performance Test
Total Plant
400+ Plants
Trademark
KEDA
Origin
China, German Technology

GENERAL INTRODUCTION

The AAC production process includes raw material preparation, batching and mixing, pouring, pre-curing, cutting, autoclaving, and packing. The entire line allows process to flow smoothly, from start to finish. The independent circulating line of mould, side plate and autoclaving car can lead the object to the original location and get ready for the next work cycle. The production line can achieve the real total automatic production without waste.Making full use of the land with the advanced overhead conveying system, special overhead cross moving system and hydraulic control system for de-moulding machine, semi-product stacking machine, separator and clamping machine, the investment of simple workshop structure can be reduced.


With decades of experience in serving the AAC blocks production machinery industry, we can supply customers with quality AAC block production lines with capacity ranging from 80,000m3 to 40,000m3 per year.

Once you have decided on the annual output, the mould size and machine model become definite, too. Then according to your specific choice and your local market demand for the size of the AAC block, we will match your AAC block production line with a suitable cutter and other ancillary equipment. For instance, if the 240 mm AAC block is needed in your market, you can choose a cutter with mould size of 4.8 x 1.2m instead of 5×1.2m type, considering that the latter would generate too many concrete wastes during cutting. 


AAC MAIN EQUIPMENTS

Sand and Fly Ash AAC Block Making Machine


The pouring mixer can batch and mix products of different densities from B03- B07 grades. With the movable lifting pouring device, the problem of flushing away the de-moulding oil and forming big bubbles caused by traditional pouring method can be effectively solved.


Sand and Fly Ash AAC Block Making Machine


Once using the lifting pouring device to cast the slurry into the freshly mould cleaned and oiled, the  lateral opening device for pouring the slurry acts as a cushion to the slurry's fall, so that the oil layer wont be washed away and which can also avoide the slurry splash and large pores . The whole casting cycle is 4~6min.


Sand and Fly Ash AAC Block Making Machine

The four around sides of mould adopt welded section steel as framework, which can ensure the good rigid, stable and non- deformed performance of the mould.With the function of position guide block for the mould locking,  the mould locking precision can be ensured and also the sealing rubber can be protected from damage.


Sand and Fly Ash AAC Block Making Machine

With the hydraulic-powered gantry crane to turn concrete blocks to various degrees, the de-moulding machine can avoid the risk of broken caused by the abrasion of wires, and to transit the cake very smoothly without deformation. Instead of using  heavy-duty industrial cranes, which lowers the height requirements of your factory, simplifies factory construction, and saves construction cost.

 
Sand and Fly Ash AAC Block Making Machine

All the steel wire posts are fixed on two main oblique beams and each pair of posts is used to fix only one steel wire, so that the horizontal cutting machine can solve the settlement cracks problem in thin block and panel cutting, and achieve the minimum horizontal cutting thickness of 50MM block out of a whole mould.


Sand and Fly Ash AAC Block Making Machine


The stability and accuracy of the vertical cutting machine can both reach the international advanced level. The integral swing frame can ensure the side plate replacement, the cutting can be synchronized with ferry replacement. With the automatic detection system, the broken wire can be timely detected.