Products

Field Girth Weld Sleeve Joint

China Field Girth Weld Sleeve Joint, Find details about China Field Girth Weld Sleeve Joint, Field Girth Weld Sleeve from Field Girth Weld Sleeve Joint

Model NO.
DN24′′
Trademark
TSD
Transport Package
Standard Export Package
Specification
ISO9001
Origin
China
HS Code
3921909090
Model NO.
DN24′′
Trademark
TSD
Transport Package
Standard Export Package
Specification
ISO9001
Origin
China
HS Code
3921909090

Field Girth Weld Sleeve JointField Girth Weld Sleeve Joint

Introduce:

Heat shrinkable sleeve is composited by cross-linked polyethylene and hot melt adhesive.
They are mainly used with treatment of tee joint,angleheads, and valve connections and
diameter-changing position. It is veryconvenient to be installed. Used for girth welding
joint Offshore and underground coatings are good! Owing to special adhesive , this product
has high adhesive strength,can provide long-term protection to pipeline. It is also very
convenient to be installed

Features & Benefit:

1.HSWS is a wraparound sleeve with a separate closure
2.Cross-linked backing provides superior abrasion, mechanical and chemical attack resistance.
3.High performance adhesive provides excellent resistance to Cathodic Disbondment to ensure
long-term corrosion protection.
4.Just-in-time customized lengths allow bulk rolls to be field cut to protect any pipe size.
5.Easy to operate and preheating temperature low(50 ºC)
6.Open sleeve configuration allows the product to be applied after the pipeline has been welded
and cleaned.

Application:

Oil, Gas, Wate, Pre-insulated Pipeline Joint corrosion protection.

Field Girth Weld Sleeve Joint

Specification:
 

Pipeline Diameter Size
From 108mm to 1554mm

Width
100mm, 150mm, 200mm, 300mm, 450mm, etc...

Thickness
1.8mm, 2.0mm, 2.2mm, 2.5mm, etc...

Measurement
Ton or Meter

Closure Patch
100mm, 150mm, 200mm, etc...

Field Girth Weld Sleeve Joint

About Us:

TSD Plastic is located in the coastal city-Qingdao, and the factory is only 1km away from Qingdao airport, 60km away from Qingdao seaport. The convenient transportation saves a lot of time and cost for our esteemed clents. 

TSD Plastic Company has its own plastic sheet production line, adhesive coating machine for heat shrinkable tapes, electro fusion welding joint line, plastic sheet and plastic welding rod All the products are produced at its own workshop from raw material to end products, so the best quality of products can be controlled. TSD products are certified to international
standards like DVGW, ISO9001, Petro China ect, anexported to more than 20 countries, which has got good
reputation because of good quality with very competitive prices! 
 
Sleeve Operating CharacteristicsTest Method Test Result
Pipeline Operating Temp.  Up to 80°C
Minimum Installation Temp.  110°C (140°F)
Mainline Coating Compatibility  PE,PP, FBE,HPPC
Adhesive Properties
Softening PointASTM E28 120°C
Lap Shear @ 23°CDIN 30672 79 N/cm2
Backing Properties
Tensile StrengthASTM D638 21MPa
ElongationASTM D638 500%
HardnessASTM D2240 43 Shore D
Volume ResistivityASTM D257 1017 ohm-cm
Sleeve Properties
Peel Strength @ 23°CDIN30672 120 N/cm
Impact ResistanceASTM G14 56Inch.LBS
Indentation ResistanceISO 21809-3 0.65mm
Cathodic Disbondment @ 23ºC,
28 days with epoxy		ASTM G8 12 mm rad
Low Temp. FlexibilityASTM D2671-C -32°C

You Might Also Like