Taiwan Automatic swing door opener (made in taiwan)

Main Features:

1) Advanced and reliable  microprocessor controller are applied.

2) Brushless motor with self-locking, a long life span and energy conservation.

3) Opening & Closing Speed adjustable.

4) Automatic / Lock/Oneway/Half-open/ Hold-open status can be set by remoted key.

5) Opening and closing smooth with low noise.

6) Safety interlock and electric lock  function.

7) Support multiple access control systems and Fire Alarm System

8) Auto-Reverse

 The standard exported Carton Package worthy for sea,air or courier.

1. Device Description

SW165 is a kind of intelligent swing door Operator, during the running time, the microprocessor measure the door's current position, speed and final position, after accurate calculation, then could get the most suitable movement method to control the moving path of each door. This could prevent the well-known problems of terminal point stop, emergency braking and sluggish speed etc. According to the door width, when power off, it could set spring tensile force of pulling open, and limited redundant force control could also increase safety level.

2. Intended use

SW165 Swing Door Operator is specially designedfor the ordinary swing door control system installed in the drying room, could be only installed in the internal of the building. Any different from the purpose and beyond the purpose of this application, could not be recommended. Expected intended use also including comply with the operating conditions which the manufacturers special required such as: Use and configure the correct arm-link type, make proper maintenance and repair.

Technical Parameters : 

The picture of Automatic swing door

Cerfication :