China Recycled HDPE, LDPE, LLDPE Plastic Raw Material, Find details about China PE Granules, Polyethylene from Recycled HDPE, LDPE, LLDPE Plastic Raw Material
Injection Grade
PROPERTIES | TEST METHOD | UNIT | VALUE |
Melt Flow Index | ASTM D1238 | g/10 min | 23 |
Density | ASTM D1505 | g/cm3 | 0.926 |
Tensile strength (Yield) | ASTM D638 | Kg/cm2 | 117 |
Elongation at break | ASTM D638 | % | 850 |
Hardness | ASTM D2240 | Shore D | 55 |
Film Grade
Typical Properties | Value | Units | Test Method |
Physical |
|
|
|
Melt Flow Rate, (190 °C/2.16 kg) | 0.25 | g/10 min | ISO 1133-1 |
Density | 0.923 | g/cm³ | ISO 1183-1 |
Mechanical |
|
|
|
Tensile Modulus | 260 | MPa | ISO 527-1, -2 |
Tensile Stress at Yield | 10 | MPa | ISO 527-1, -2 |
Film |
|
|
|
Dart Drop Impact Strength, F50 | 250 | g | ASTM D1709 |
Tensile Strength |
|
|
|
MD | 27 | MPa | ISO 527-1, -3 |
TD | 25 | MPa | ISO 527-1, -3 |
Tensile Strain at Break |
|
|
|
MD | 200 | % | ISO 527-1, -3 |
TD | 500 | % | ISO 527-1, -3 |
Coefficient of Friction | >0.8 |
| ISO 8295 |
Application:
For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity
and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.