2. Stable DC motor, stable operation and strong driving force;

3. Automatic lifting brush plate and suction grill, convenient and fast;

4. There is an inductive switch inside the sewage tank to sense the sewage position. If it exceeds the limit, it will stop automatically to protect the motor

5. 4 maintenance free Tianneng / Chaowei batteries, big brand, more stable performance;

6. Floating brush plate design, even control water, clean thoroughly and reduce brush wear, reduce the cost of consumables

7. Integral cast aluminum water absorption grill, thickening and weighting, better water absorption effect

8. Super large water tank solves the problem of frequent water addition for small floor washer;

9. The integrated design of washing and drying makes the floor dry after use;

10. Intelligent charging: automatic protection after full charge;

11. Good cleaning effect, with sewage recovery tank, sewage, sand, automatic suction sewage tank


Part II: Advantage of floor scrubber

1. European style, ergonomic design, simple and elegant.

2. Adjustable blade, good water absorption effect, convenient disassembly.

3.Intelligent control system ensure comfortable and safe operation and stable.

4.Design of automatic loading and unloading brushing plate which is convenient for use.

5.Big capacity tank & wide brush width make cleaning more efficient.

6.Maintenance free battery can guarantee longer working life.

7.Imported vacuum motor ensures high dry performance.

8.Low-noise, can be used in hospitals and other quiet environments.

9.Imported water absorption strip with better water absorption effect.


Part III: Datas of J100S floor scrubber

Part IV:Applicable floor materials

The floor scrubber applies to municipal building site,square,super market ,factories ,workshop and a variety of public places.

And can clen Terrazzo floor, PVC hard floor, Vitrified brick floor, Epoxy floor, Emery wear-resistant floor and concrete/cement floor etc..

Each machine is put on a polywood pallet, then carton;

Wooden box or air bubble film and carton for plastic products or as your request.

Normally, for testing sample, we can arrange the delivery within 7 days;

Part V: FAQ
Insufficient water on the brush plate

1. Check that the water valve is open
2. Check the amount of water in the clean water tank
3. Check whether the water filter is clean (if any)
4. Check whether the pipe conveying water to the brush plate is blocked

Incomplete machine cleaning
Check the wear of the brush discs and replace them if necessary (the brush discs should be replaced when the length of the bristles is less than 15mm). Replace it with another brush plate of the same specification. When cleaning on the real dirty ground, special brush plate should be used, which is specially provided according to the needs

The effect of water absorption is not good
1. Check whether the absorbent strip is clean. Is there any solid residue left in it

2. Replace the damaged adhesive tape. Adjust the angle of suction grill. For the correct use, the height of the suction grill should be adjusted according to the abrasion of the rubber strip; in the process of cleaning, the back rubber strip should be bent back 5mm in its length direction

3. Check whether the suction pipe has been correctly inserted into the inlet of the sewage tank