Tool Box Extrusion Moulding Blow Machine:
1). blow molding machine experience of the engineer for more than 12 years
2). Machine produce the  toolbox,jerrycans,roadblocks and etc.
3). The capacity is about 60PCS/h.
4). The famous imported components for machine
5). Taiwan Yuken hydraulic valve for stable working
6). The deflashing system can be equiped according to customer's request.

2. Main characteristics of Tool Box Extrusion Moulding Blow Machine:
1). Accumulator head, single layer, the capacity is up to 60L jerrycan, drum, toolbox ands etc.
2). It process the material as HDPE, PP, ABS and etc.
3). Power supply: 380VAC, 50Hz (depending on client's county ).
4). The machine is mainly composed of extrusion system, die head system, clamping system, hydraulic system and electrical systems

The brief introduction for this Tool Box Extrusion Moulding Blow Machine:
Extrusion system: Screw: Specially designed based on material's trait, High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2. Barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2.
Die head system: Accumulator die head, single cylinder, central injection, vertical fist in first out design, accumulator channel slick; Slip parts like injection piston and cylinder made with different material and technique, work balanced and reliable.
Clamping system: Fixed clamping system, double diagonal tie bar single cylinder central clamping, wider space for the mould, install and dismantle the mould easily, linear roll guide rail.
Hydraulic system: Adopted proportional pressure controlling, with hydraulic valve and pump of Taiwan Yuken, balanced and accurate action, prolonged useful life, sensitive response.

This Tool Box Extrusion Moulding Blow Machine mainly used to produce 60L plastic roadblock,drum ,chemical drum and oil drum and toolbox. Some basic parameters are as follows:
1.Screw diameter: 90mm
2.L/D ratio: 30/1
3.Max capacity: 60L
Dry cycle: 180pc/h
Clamping force: 410KN
Platen open stroke: 450-1250mm
plasten size: 1020*1060mm
Max platen size: 1020*1060mm
Oil Pump Power: 15kw
Extrusion motor: 45KW
Plasticizing capacity: 170kg/h
Heating zone: 5 zones
Extrusion heating power: 25.1kw
Power of Die heating: 26kw
Max die pin diameter: 460mm
Accumulator head capacity: 6.6L

3. Advantages of this Tool Box Extrusion Moulding Blow Machine:
1). Adopt energy-saving system which can increase the 20% efficiency.
2). The capacity is about 30PCS/h which is15% higher than some others.
3). Power consumption is about 15% lower.
4). All process are well computerized which makes the operation more conenient.
5). Imported hydraulic components which gurantee the stable working for long time.

4. Products produced by this Tool Box Extrusion Moulding Blow Machine: