2200C Heat Resistant Zirconia ZrO2 Ceramic Crucible
1.Zirconia Ceramic Crucible Brief Introduction.
Mission Ceramic supply high quality zirconia ceramic crucible.
Material is yttria fully stabilized zirconia (Y203-ZrO2), other material like Cao-ZrO2, MgO-ZrO2 are available.
Our Zirconia ceramic crucible can be used at very high temperature, 2200C at most.
Our zirconia ceramic crucible is made by ISO pressing, It can be machnined to make a tight tolerance.
2.Sizes of Zirconia Ceramic Crucibles
Mission has been making zirconia crucibles for long time, many sized moulds in stock.
I believe there's one suitable for your application.
Sizes Of Zirconia Crucible |
OD (mm) | 25 | 35 | 40 | 50 | 55 | 60 | 75 | 120 | 120 | 120 |
ID (mm) | 21 | 31 | 35 | 44 | 47 | 52 | 69 | 110 | 114 | 108 |
H (mm) | 25 | 35 | 40 | 60 | 150 | 110 | 90 | 60 | 80 | 220 |
For other sizes, please contact with us.
3.Zirconia Ceramic Crucible Technical Data
Y-FSZ Ceramic Properties |
Chemical content | ZrO2 | 86 wt% |
Y2O3 | 14 wt% |
Physical Properties | Melting point | ≥2500ºC |
Max. operating temperature | 2200ºC |
Color | White |
Density | 5.8g/cm3 |
Mechanical properties | Flexural strength | 200MPa |
Young's module | 200GPa |
Hardness(HRA) | 86 |
Thermal properties | Thermal expansion coefficient(20ºC) | 8-10X10-6 |
Thermal conductivity | 1-2W/mk |
Electrical properties | Dielectric constant(1MHz25ºC) | 12 |
Electrical resistivity(25ºC) | 109 |
4.Usage of Zirconia Ceramic Crucible
High temperature container, used for melting precious metal, and metal alloy.
5.Zirconia Ceramic Crucible Package
Wood box padded with foam board.
About Our Comapny
Zhengzhou Mission Ceramic Products Co.,Ltd is located in Zhengzhou Advanced Al2O3 Wear Resistant Ceramic RodCity,Henan Province. We have been focused on high quality ceramic products for years. We are providing the following materials.
1.Alumina mainly 95% to 99.7% purity.
2.Zirconia,including FSZ and PSZ, Y2O2-ZrO2,CaO-ZrO2,MgO-ZrO2 available.
3.Silicon Carbide, including SiSIC,ReSiC,NSiC,SSiC.
4.Boron Nitride(BN)
5.Ceramic Fiber products,including board,blanket,and bulk fiber.
6.Heaters,mainly Molybdenum Disilicide(MoSi2) and Silicon Carbide(SiC) heaters.
For different ceramic part,we have different processing method,including Casting,Extruding,Tape Casting,Dry pressing and ISO pressing.
If you are interest in any of our products,please let us know.I believe you will like our products and service.