Yr Winding Type High Voltage Motor.

China Yr Winding Type High Voltage Motor., Find details about China Yr Motor, High Voltage Motor from Yr Winding Type High Voltage Motor.

Model NO.
YR4501-8-315KW
Number of Poles
8
Starting Mode
Auto-induction Voltage-reduced Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Nsulation Class
F
Output Power
315kw
Cooling Method
IC01/IC411
Protection
IP23/IP44/IP54
Duty
S1
Frequency
50Hz.60Hz
Wire
Copper Wire
Driving
Compressor, Pump, Crushers, Stock-Removing Machine
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
YR4501-8-315KW
Number of Poles
8
Starting Mode
Auto-induction Voltage-reduced Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Nsulation Class
F
Output Power
315kw
Cooling Method
IC01/IC411
Protection
IP23/IP44/IP54
Duty
S1
Frequency
50Hz.60Hz
Wire
Copper Wire
Driving
Compressor, Pump, Crushers, Stock-Removing Machine
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Yr Winding Type High Voltage Motor.
The power level, installation dimensions and electrical performance of the HV high-voltage slip ring three-phase asynchronous motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The bearing of HV wound rotor slip ring motor has two types of rolling bearing and sliding bearing, depending on the motor power and speed. If the motor has a high degree of protection, the protection level of the bearing will also increase. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
HV winding rotor slip ring motor main outlet box is IP54 protection grade, generally installed on the right side of the motor (facing the motor shaft extension end), can also be installed on the left side of the motor according to the order requirements. Inside the main outlet box, outside There are separate ground terminals.
HV winding slip ring motor increases the setting and bearing temperature measuring device. It can also add heating device inside the motor. The shaft extension key of the motor generally adopts the tangential key, and the motor carbon brush is not lifting structure.
HV wound rotor slip ring motor can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants, etc. Used as prime mover in various industrial and mining enterprises. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
Yr Winding Type High Voltage Motor.
Center height range: H355 ~ 1000mm

Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP23 or IP44
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC01/IC611
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).

Yr Winding Type High Voltage Motor.
The HV wound rotor slip ring motor can increase the large starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
Yr Winding Type High Voltage Motor.
Yr Winding Type High Voltage Motor.

1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.
2, the product packaging is protected by moisture, water plastic soft packaging
3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package.
4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).
Yr Winding Type High Voltage Motor.
Yr Winding Type High Voltage Motor.
Main process flow of the motor
Motor stator: casing processing → punching press → iron core seating → coil making → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → machine test → motor appearance coloring → packaging storage

 Yr Winding Type High Voltage Motor.
Yr Winding Type High Voltage Motor.

If you are interested in our products motor,pls feel free to contact us!  Thank you very much!
Shijiazhuang ZCL Electric Motor Technology Co., Ltd
ADDRESS: Industrial Zone, Zhangjiazhuang Town, Airport Road, gaocheng District, Shijiazhuang, Hebei, China
HEBEI PROVINCE, CHINA
TEL/FAX: 86-13785015679/ 86-311-89246924
 
Welcome to visit our factory!!!