Feldspar/ Talc/ Fluorite Cone Crusher
China Feldspar/ Talc/ Fluorite Cone Crusher, Find details about China Spring Cone Crusher, Symons Cone Crusher from Feldspar/ Talc/ Fluorite Cone Crusher
Basic Info.
Model NO.
HPT-300
Inlet Size
300×1300mm
Condition
New
Name
Feldspar/ Talc/ Fluorite Cone Crusher
Keywords
Cone Crusher
Color
Customization
Material
Carbon Steel
Trademark
hc
Transport Package
Nude Packing
Specification
2.3*1.5*2.5m
Origin
China
Model NO.
HPT-300
Inlet Size
300×1300mm
Condition
New
Name
Feldspar/ Talc/ Fluorite Cone Crusher
Keywords
Cone Crusher
Color
Customization
Material
Carbon Steel
Trademark
hc
Transport Package
Nude Packing
Specification
2.3*1.5*2.5m
Origin
China
Product Desciption
Introduction of feldspar/ talc/ fluorite cone crusher
Cone crusher can crush materials of above medium hardness. And it is widely used in metallurgy, building, hydropower, transportation, chemical industry, etc. When used with jaw crusher, it can be used as secondary, tertiary or quaternary crushing. Generally speaking, the standard type of Symons cone crusher is applied to medium crushing. The medium type is applied to fine crushing. The short head type is applied to coarse fine crushing. As casting steel technique is adopted, the machine has good rigidity and large high strength.
working principales of feldspar/ talc/ fluorite cone crusher
1. When cone crusher is working, motor drives the eccentric sleeve to rotate. The eccentric sleeve drives the transmission shaft and cone part to make swing movement. When they swing to the extent that the surface of the crushing wall is close to the roll mortar wall, the rocks and ores are pressed and crushed.
2. Joint between supporting sleeve and frame is compressed by spring. When metal block and other materials that can no be crushed fall into the crusher, spring will be out of sharp and discharge the objects.
3. When the materials that can not be crushed pass through the crushing chamber or the machine overloads, the spring safety system makes the cone discharging hole become larger. When objects are discharged from crushing chamber, discharging hole will automatically reset. Cone crusher resumes normal operations.
4. The surface of crushing chamber is covered with wear-resisting high manganese steel lining plate. Size of discharging hole can be adjusted hydraulically or manually.
characteristics of feldspar/ talc/ fluorite cone crusher
1. Our cone crusher has the characteristics of large breaking force, high efficiency, high crushing capacity, low operating cost and long service life. It is convenient to operate and is economical.
2. The crushed materials are of equal size, thus reducing circulating load.
3. Large and medium-sized crushers adopt hydraulic chamber-cleaning systems, which will help reduce the down time.
4. Cone crushers with different chambers are available, to meet our customers' requirements.
5. Grease seal can effectively avoid the blockage of water feeding system and drainage system, as well as mixing of water and oil.
6. As the overload protection device, spring safety device allows foreign matter and iron pieces to pass through the crushing chamber without jeopardizing machines.
Cone crusher can crush materials of above medium hardness. And it is widely used in metallurgy, building, hydropower, transportation, chemical industry, etc. When used with jaw crusher, it can be used as secondary, tertiary or quaternary crushing. Generally speaking, the standard type of Symons cone crusher is applied to medium crushing. The medium type is applied to fine crushing. The short head type is applied to coarse fine crushing. As casting steel technique is adopted, the machine has good rigidity and large high strength.
feldspar/ talc/ fluorite cone crusher cone crusher equipment technical parameters for reference
| Model | Feed opening (mm) | Max feed size(mm) | Discharge size (mm) | Capacity (T/H) | Motor (KW) | Weight (T) |
| PYB-600 | 75 | 65 | 12-15 | 40 | 30 | 5.0 |
| PYD-600 | 40 | 35 | 3-13 | 12-23 | 30 | 5.1 |
| PYB-900 | 135 | 115 | 15-50 | 50-90 | 55 | 11.2 |
| PYZ-900 | 70 | 60 | 5-20 | 20-65 | 55 | 11.2 |
| PYD-900 | 50 | 40 | 3-13 | 15-50 | 55 | 11.3 |
| PYB-1200 | 170 | 145 | 20-50 | 110-168 | 110 | 24.7 |
| PYZ-1200 | 115 | 100 | 8-25 | 42-135 | 110 | 25.0 |
| PYD-1200 | 60 | 50 | 3-15 | 18-105 | 110 | 25.3 |
| PYB-1750 | 250 | 215 | 25-50 | 280-480 | 160 | 50.3 |
| PYZ-1750 | 215 | 185 | 10-30 | 115-320 | 160 | 50.3 |
| PYD-1750 | 100 | 85 | 5-15 | 75-230 | 160 | 50.2 |
| PYB-2200 | 350 | 300 | 30-60 | 590-1000 | 280/260 | 80.0 |
| PYZ-2200 | 275 | 230 | 10-30 | 200-580 | 280/260 | 80.0 |
| PYD-2200 | 130 | 100 | 5-16 | 120-340 | 280/260 | 81.4 |
working principales of feldspar/ talc/ fluorite cone crusher
1. When cone crusher is working, motor drives the eccentric sleeve to rotate. The eccentric sleeve drives the transmission shaft and cone part to make swing movement. When they swing to the extent that the surface of the crushing wall is close to the roll mortar wall, the rocks and ores are pressed and crushed.
2. Joint between supporting sleeve and frame is compressed by spring. When metal block and other materials that can no be crushed fall into the crusher, spring will be out of sharp and discharge the objects.
3. When the materials that can not be crushed pass through the crushing chamber or the machine overloads, the spring safety system makes the cone discharging hole become larger. When objects are discharged from crushing chamber, discharging hole will automatically reset. Cone crusher resumes normal operations.
4. The surface of crushing chamber is covered with wear-resisting high manganese steel lining plate. Size of discharging hole can be adjusted hydraulically or manually.
characteristics of feldspar/ talc/ fluorite cone crusher
1. Our cone crusher has the characteristics of large breaking force, high efficiency, high crushing capacity, low operating cost and long service life. It is convenient to operate and is economical.
2. The crushed materials are of equal size, thus reducing circulating load.
3. Large and medium-sized crushers adopt hydraulic chamber-cleaning systems, which will help reduce the down time.
4. Cone crushers with different chambers are available, to meet our customers' requirements.
5. Grease seal can effectively avoid the blockage of water feeding system and drainage system, as well as mixing of water and oil.
6. As the overload protection device, spring safety device allows foreign matter and iron pieces to pass through the crushing chamber without jeopardizing machines.
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle