China Tungsten Copper Alloy Tungsten Heavy Alloy Wnicu, Wnife, Find details about China Tungsten Alloy, Tungsten Copper Alloy from Tungsten Copper Alloy Tungsten Heavy Alloy Wnicu, Wnife
WCu Copper tungsten alloy plate / sheet / tungsten alloy rod
Copper tungsten alloy WCu plate/sheet/wafer
1. WCu tungsten aloy specification:
1) WCu (W70Cu, W75Cu, W80Cu, W85Cu, W90Cu, etc)
2) Density:16-18.8g/cm3
3) Size:As your need
Plate: (0.04-50)* W X L
rod-Dia.1.5 - 200 X 300mm Long
4) Flatness tolerance:<4um
5) Roughness:Ra1.6-Ra0.8
6) Surface: polished, ground.
2. Property Brief Introduction
W-Cu heat sink material is a composite of tungsten and copper, with both tungsten low expansion characteristics, but also has copper of high thermal conductivity properties, and the tungsten and copper in the thermal expansion coefficient and thermal conductivity can be adjusted with the W-Cu composition, also the composite can be machined to various shape, these features make the application of this composite with great convenience.
1) high melting point, high strength,
2) smooth and clean surface,
3) good conductions, small linear expansion coefficient and good heat-resistance
3. Chemical composition
Material | WCu% Tungsten Content | Hardness HB | g/ Density at 20ºC | W/M.K Thermal conductivity at 25ºC | (10-6/k) Coefficient of thermal expansion at 20ºC |
W90Cu10 | 90 | 260 | 17.0 | 180-190 | 6.5 |
W85Cu15 | 85 | 240 | 16.4 | 190-200 | 7.0 |
W80Cu20 | 80 | 220 | 15.6 | 200-210 | 8.3 |
W75Cu25 | 75 | 195 | 14.9 | 220-230 | 9.0 |
W50Cu50 | 50 | 125 | 12.2 | 310-340 | 12.5 |
Top grade W50-W90% wolfram tungsten copper alloy plate
Material: W50-90Cu10-50
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: the main sizes see attachment
WCu alloy rods size: diameter(3-100mm)*L<500mm
4. Property of high tungsten heavy alloy WNiCu, WNiFe
AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5-20%
AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.2
Hardness: 33HRC max
Elongation: 5-15%
AMST 21014 class 3
95%WNiFe, W95NiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3-10%
AMST 21014 class 4
97.5%WNiFe, W97.5NiCu
Density : 18.85
Hardness: 35HRC max
Elongation: 1-8%
Diameter | Wall thickness | Length |
30-50 | 2~10 | <1300 |
50-100 | 3~15 | |
100-150 | 3~15 | |
150-200 | 5~20 | |
200-300 | 8~20 | |
300-400 | 8~30 | |
400-450 | 8~30 | |
450-500 | 8~30 |