Tungsten carbide alloy tungsten alloy ring

WNiCu tungsten alloy WCu plate/sheet/wafer
1. WCu tungsten aloy specification:
  1) WCu (W70Cu, W75Cu, W80Cu, W85Cu, W90Cu, etc)
  2) Density:16-18.8g/cm3
  3) Size:As your need
    Plate: (0.04-50)* W X L
    rod-Dia.1.5 - 200 X 300mm Long

  4) Flatness tolerance:<4um
  5) Roughness:Ra1.6-Ra0.8
  6) Surface: polished, ground.

2. Property Brief Introduction
W-Cu heat sink material is a composite of tungsten and copper, with both tungsten low expansion characteristics, but also has copper of high thermal conductivity properties, and the tungsten and copper in the thermal expansion coefficient and thermal conductivity can be adjusted with the W-Cu composition, also the composite can be machined to various shape, these features make the application of this composite with great convenience.
 1) high melting point, high strength,
 2) smooth and clean surface,
 3) good conductions, small linear expansion coefficient and good heat-resistance

3. Chemical composition

4. Property of high tungsten alloy WNiCu, WNiFe

AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5-20%

AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.2
Hardness: 33HRC max
Elongation: 5-15%

AMST 21014 class 3
95%WNiFe, W95NiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3-10%

AMST 21014 class 4
97.5%WNiFe, W97.5NiCu
Density : 18.85
Hardness: 35HRC max
Elongation: 1-8%