Products

Mf1501 Epoxy Folding Adhesive

China Mf1501 Epoxy Folding Adhesive, Find details about China Mf1501 Epoxy Folding Adhesive, Single Component Sealant from Mf1501 Epoxy Folding Adhesive

Model NO.
MF1501
Bonding Material
Aluminum
Trademark
SILANDE
Transport Package
Cartons
Specification
400g/piece, 20kg/drum, 200kg/drum
Origin
China
HS Code
3506919010
Model NO.
MF1501
Bonding Material
Aluminum
Trademark
SILANDE
Transport Package
Cartons
Specification
400g/piece, 20kg/drum, 200kg/drum
Origin
China
HS Code
3506919010
 
MF1501 Epoxy Folding Adhesive
 
MF1501 Epoxy Hemming Adhesive is a one-component, heat-curing, toughened and modified epoxy structural adhesive. It has good willfulness, mechanical strength and durability. It has good properties on oily, non-oily steel and galvanized steel. The bonding performance.

Features
Single component, heat curing
No smell, environmental protection
Good thixotropy, excellent construction performance, good sag resistance
Good toughness, bonding performance, durability

use
MF 1501 Epoxy Hemming Adhesive is used for bonding the lap joints of the inner and outer plates of the door, engine cover, trunk (door) cover, etc. during the welding process of automobiles.

Instructions for use
1. Foreseeable matters
Before use, the bonding material should be tested for adhesion.
2. Construction
The bonded seal should be less oily, dry and free of corrosion.
Use a glue injection gun or glue injection machine to hit the product in a strip shape on the surface to be bonded, and assemble it with the inner board by wrapping and spot welding. If mechanical glue injection is used, the minimum recommended compression ratio of glue coating is 48:1; this product is generally only applied to a steel plate, and the rubber strip is 2mm~5mm wide. After bonding the two parts, they can be spot welded immediately.
When the construction environment temperature is low in winter, the viscosity of this product will increase, which may cause difficulty in glue injection. It is recommended
Use the pre-heating method for this product before construction, the heating temperature should not exceed 45C, and the cumulative heating time should not exceed 8h.
3. Clean
The uncured glue during construction can be removed with a clean cloth with alcohol, and the cured glue can be removed mechanically.

Store
Can be stored for 6 months in a cool and dry place at 10C ~ 20C

package
400g/piece, 20kg/drum, 200kg/drum

transport
MF1501 Epoxy Hemming Adhesive is non-dangerous and can be transported by train, car, ship, and airplane.


Mf1501 Epoxy Folding Adhesive
Mf1501 Epoxy Folding Adhesive

You Might Also Like