Products

Professional Zinc Coating Thickness Gauge with Magnetic Method Eddy Current Method

China Professional Zinc Coating Thickness Gauge with Magnetic Method Eddy Current Method, Find details about China Coating Thickness Tester, Panit Thickness Insturment from Professional Zinc Coating Thickness Gauge with Magnetic Method Eddy Current Method

Model NO.
EC-500
Reading Memory
50 Readings
Trademark
Yuwen
Transport Package
Tool Box/Carton
Specification
0~1500 um, 2%+1 um
Origin
Shenzhen China
HS Code
9031809090
Model NO.
EC-500
Reading Memory
50 Readings
Trademark
Yuwen
Transport Package
Tool Box/Carton
Specification
0~1500 um, 2%+1 um
Origin
Shenzhen China
HS Code
9031809090
High-quality digital thickness gauge meter for paper measurement
 
Product Overview

EC-500A/EC-500
These gauges can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.
 
Function & Benefits

·  High accuracy and stability
·  LCD shows number, mean, maximum, minimum
·  Easy to do zero calibration
·  Power off automatically
·  Low battery indication
·  Detect the substrates type automatically
 
Wide Range Of Application

· Metalwork                          · Automobile Works              · Used Car Market                                    
· Foil Manufacturer             · Industrial Lacquer              · Paper Mill 
 
Specification
 
ModelEC-500EC-500FEC-500N
ProbeF-Probe & N-ProbeF-ProbeN-Probe
Measuring PrincipleMagnetic induction & Eddy CurrentsMagnetic inductionEddy Currents
Measuring Range0 to 1500um
Accuracy± (2%+1um)
Resolution0~99.9(0.1um)    100um~999um(1um)        1000um~1500um(0.01mm)
0mils~3.933mils (0.004mils), 3.934mils~39.39mils (0.01mils), 39.4mil~51.2mil (0.1mil)
CalibrationOne point to four point calibration, zero point calibration
Data GroupOne direct group(readings not be stored to memory)
Four general groups (readings will be stored automatically)
NOTE: each group have individual statistics, alarm limit settings and calibration
StatisticsNo. of readings, mean, minimum, maximum and standard deviation
Unitsum, mm, mil
AlarmUser can set the high/low alarm limit; Alarm icon displayed on LCD when over the limit
Minimum Curvature Radius Convex1.5mm
Minimum Curvature Radius Concave25mm
Minimum Measuring AreaDiameter 6mm
Minimum Thickness Of SubstrateF-probe: 0.5mm(0.02");N-probe: 0.3mm(0.012")0.5mm(0.02")0.3mm(0.012")
Maximum Measuring RateTwo readings per second
Computer InterfaceDownload data via USB
Power SupplyTwo 1.5V AAA battery
Operation EnvironmentTemperature: 0 to 40°C(32 to 104°F); Humidity: 20% to90%RH
Storage EnvironmentTemperature: -20 to 70°C(-4 to 158°F)
Standard CertificationROHS ;WEEE;CE
Dimensions110mm*53mm*24mm(4.33"*2.09"*0.94")
Case Material And WeightABS; 92g(3.24 oz)
 
More Pictures
Professional Zinc Coating Thickness Gauge with Magnetic Method Eddy Current Method
Professional Zinc Coating Thickness Gauge with Magnetic Method Eddy Current Method
Professional Zinc Coating Thickness Gauge with Magnetic Method Eddy Current Method
Professional Zinc Coating Thickness Gauge with Magnetic Method Eddy Current Method





 
Ask And Question

 1. Is the measuring error large?
 •  Enter the menu interface, clear the calibration data; shut down to   restore the factory configuration steps; do zero calibration after booting, (Note: you need to do      zero calibration on the customer's own substrate)

2. Does the measurement screen display overflow?
•   The coating thickness exceeds the measurement range.
•   There is an error and zero calibration is required on the substrate. 
•   Probe fault

3. Measurement no response? 
•   Check if the battery has power.
•   The probe has a fault.
•   Whether the measured material meets the measurement principle.                    

4. Does the measurement show a negative number?
•   It is judged according to the customer's materials whether the machine accuracy is applicable.
•   The calibration did not do well and needs to be recalibrated.

 5. During the measurement process, is it sometimes display F, sometimes display N?
 •  The automatic mode undistinguishable the type of material and it requires manual switching of the measurement principle.

 6. How to do calibration?
 •   Please refer to the zero calibration, point calibration step.

 7. Long press "ZERO" does not respond?
 •  You need to restore the factory settings and then operate.

 8. It can measurement but there is no reading, why?
 •   Confirm whether the mode is in continuous measurement mode 
 •   Check if the beep is broken

Why Us?
  1. From raw materials to final products, we have a strict quality control system. Our defective rate is about 0.1%.
  2. Our staff is well-trained and educated in this industry, we will save money in the end because of our efficiency and know-how.
  3. We have been in business for 10 years and thanks to our R&D department, we always catch the latest trend in the market.
  4. With the required certificate and experience after-sales service, there was no issue in the shipment we have arranged.  
  5. We have rich experience in handling orders for heavy buyers with the professional process.
       •  Stable raw material purchasing
       •  Favorable order follow-up management
       •  Laudable lead-time & shipment control
       •  Traceable quality evaluation
       •  Flexible payment terms
       •  Remarkable after-sale service
    6. Innovative testing technology is always pursued and to do.
       •  We are first to create the LED display rotated and red backlight alarm in the world.
       •  We are the first one create menu operations for coating thickness gauges in China.  
       •  Software: Dgraph can be so easily used to set up, download data, view graph and output reports.
 

You Might Also Like