Products

Digital Intelligent Pyroelectric Infrared Sensor

China Digital Intelligent Pyroelectric Infrared Sensor, Find details about China Sensor, Pyroelectric from Digital Intelligent Pyroelectric Infrared Sensor

Model NO.
S918-H
Measuring Medium
Temperature
Certification
RoHS
Customized
Customized
Trademark
Finewin
Transport Package
The Packaging Is Solid
Specification
customized
Origin
China
Model NO.
S918-H
Measuring Medium
Temperature
Certification
RoHS
Customized
Customized
Trademark
Finewin
Transport Package
The Packaging Is Solid
Specification
customized
Origin
China
Pyroelectric passive infrared sensor                         
  1. FEATURES
       * High sensitivity and superior  SNR(signal-to noise ratio)  
* High stability for temperature change
* High anti-interference ability (For example: vibration, radio
frequency interference)
2.    applications
toy
IoT sensors
Digital Frame
Induction light
TV, refrigerator, air conditioner
Web camera
USB alarm
PIR motion detection
Intrusion detection
Occupancy detection
Control of indoor lights, corridors, staircase lights, etc.
Private alarm
LAN monitor
Car anti-theft system
3.  applications  RANGE
This specification describes a pyroelectric passive infraredsensor for passive infrared sensor device.
4.  TYPE OF SENSOR
 Balanced differential type (Series opposed type.)
5.  APPEALANCE AND DIMENSIONS
      5.1 Visual inspection
           There are not remarkable wounds,spots,rust and etc.
       5.2  APPEALANCE AND DIMENSIONS
            TO-5 Package: see fig 1.

6. ELECTRICAL CHARACTERISTICS( at 25ºC )
     
 ITEM CONDITION RATING
6.1
      Signal Output
  • Black Body temperature: 420K
  • Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
  • Vd=5V,Rs=47KΩ,the amplifier of Gain 72.5dB
  • Measurement method shown in Fig2.
>3500mVp-p
 
6.2 Noise Output
  • Chopping Frequency:  1HZ, 0.3~ 3.5HZ △f
  • Vd=5V,Rs=47KΩ,the amplifier of Gain 72.5dB
  • Measurement method shown in Fig2.
< 70mVp-p
 
6.3 Balance output
  • Black Body temperature: 420K
  • Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
  • Vd=5V,Rs=47KΩ,the amplifier of Gain 72.5dB
  • Measurement method shown in Fig2 and Fig3.
        VA = A Element sensitivity(Vp-p)
        VB = B Element sensitivity(Vp-p)		|VA-VB|/(VA+VB) ×100%≤10%
 
6.4 Operating VoltageSingle power supply
RS=47KΩ		2~15V
6.5 Source Voltage   VD=5V,RS=47KΩ0.4~1.0V
6.6 Circuit Configuration         See Fig.3 
6.7 Warm-up Time   After it conneted, it with the measurement amplifier for Fig.3 description that turns on the power supply beforehand, the amplification output is time until stabilizing.Max: 25 Sec


7. OPTICAL CHARACTERISTICS
 
 ITEM RATING
7.1Field of View138 degrees from center of Element on Axis X.
125 degrees from center of Element on Axis Y.
See Fig 5
7.2Response wavelength bandFilter substrate:Silicon
Cut on wavelength:5.5±0.5μm
Transmission:7~14μm  ≥75%
7.3 Transmission Characteristics of filterSee Fig 6

8. ENVIRONMENTAL REQUIREMENTS
 
 ITEM RATING
8.1 Operating Tmeperature-30~70 ºC
8.2 Storage Temperatur-40~80 ººC
8.3 Relative HumidityThe sensor shall operate without increase in Noise Output when exposed to 90 to 95% RH at 30ºC continuously
8.4 Hermetic SealNo bubbles visible in the 125±5ºC fluorocarbon bath(FC-40) for 20sec
8.5 Reliability TestSpecified in Appendix1( page13~14)

9.  RoHS COMPLIANCE
This product conforms to RoHS regulatin.
10. INSPECTION
10.1  Process inspection
                 100% inspection: Item 6.1 to 6.3 and 6.5 among the electric performances of item 6.
   10.2  OUTGOING INSPECTION
                 Based on statistical sampling inspection method every manufacture lot is inspected for the electrical
                 characteristics item 6.1to 6.3 ,6.5 of the Item 6,and item 5.1 and 5.3 of the appearance of item 5.
11. PACKING
    The packaging is solid and there isn't  breakage
12.process atFailure
        In case of finding of failure incoming or process inspection after receipt of products, Both sides  negotiate to
          deal  with the failure
13.FIELD OF VIEW
Digital Intelligent Pyroelectric Infrared Sensor
14.TEST CIRCUIT CONFIGURATION
Digital Intelligent Pyroelectric Infrared Sensor
15.TYPICAL TRANSMISSION CHARACTERISTICS OF FILTER
Digital Intelligent Pyroelectric Infrared Sensor


Digital Intelligent Pyroelectric Infrared Sensor






 

You Might Also Like