Mobilephone RFID reader 125khz rfid Reader bluetooth reader Introduction Appling Mobilephone Blue tooth 4.0 into RFID access control industry is a totally new technology. Just install 'App', shake mobilephone around the reader or click 'one click to open', verification completed to open the door. Specification 1.Working voltage:9~12VDC. 2. Current: average 50mA, peak 100mA 3. Frequency: 125 KHz or 13.56 MHz; Mobile Blue tooth 4.0 4. Communication interface: Wiegand26, Wiegand34 5. Environment: temperature -20ºC~65ºC, humidity 0 ~ 95% 6. Reading distance: RFID Card: 1~5cm;bluetooth:1-5M 7. Connection cable: 8pin shielded twisted pair, max 100 m. 8.Size:86*86*18mm. 9. Housing material: ABS 10. Supported technology: Bluetooth 4.0 on Android 4.4+ or ios 7.0+ | Model Name | E102A Card Reader Access Control |
| Color | Black / Champagne |
| Voltage | DC9~16V |
| Current | ≤100mA |
| Ambient Temperature | -25°C~75°C |
| Reading Range | 1-5CM |
| Bluetooth reading range | 1-10m |
| Output Format | Wiegang26 or 34 |
| Card Type | EM-ID/Mifare-IC |
| Comunication Distance | WG≤100M |
Installation
Using "+"type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow Alarm
Notice!
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.