China Deep Cycle Graphene Battery Pack 140V 20kwh Battery for Solar Storage Telecom Backup Battery, Find details about China Heave Crane Machinery, Charger Station Power Supplier from Deep Cycle Graphene Battery Pack 140V 20kwh Battery for Solar Storage Telecom Backup Battery
FEATURES |
|
No. | Part Number | GTEM-140V20K-R |
1 | Energy storage | 21200Wh |
2 | Rated Voltage | 138V/DC |
3 | Maximum Charge Voltage | 168V/DC |
4 | Discharge Cut-off Voltage | 120V/DC |
5 | ESR/AC @1KHz 50% SOC | <100mΩ |
6 | Max. Continuous Charge Current | 160A |
7 | Max. Continuous Discharge Current | 160A |
8 | Cut-off Current (charging) | 5A |
9 | Peak Discharge Current (10s) | 200A |
10 | Weight | 290Kg |
11 | Output Terminal | Connector |
12 | Charge Temperature | -10ºC~+60ºC |
13 | Discharge Temperature | -20ºC~+60ºC |
14 | Operating Humidity | 0~90% RH Non-condensing |
15 | Cells Self-discharge Rate | 3% per month |
16 | Projected Cycle Life ( 25ºC) | 50,000 times |
17 | Projected Calendar Life | 15 years |
18 | Recommended Depth of Discharge | ≤ 90% |
19 | Maximum Depth of Discharge | 100% |
20 | Cooling Method | Air conditioning cooling |
21 | Shell Material | Metal |
22 | Monitoring Data | Module voltage,SOC |
23 | Indicator light display | Capacity % |
24 | Environmental Protection | IP65 |
25 | Series or Parallel Connection | Not allowed |
27 | Storage Conditions | -20ºC~+40ºC 25% ~ 95%RH SOC>30%,one full charge needed per two months |
28 | Certificates Compliant | UN38.3 |
EN 62133:2013, EN 55032:2015+AC:2016, EN 55035:2017, EN 61000-3-2:2014, EN 61000-3-3:2013 |
NO. | Item | Parameter | Remark |
1 | Cells Balancing | Active | Smart active balancing |
2 | Over-temperature | 55ºC | Shutdown |
3 | Short Circuit Protection | 400A | Fused and need to change fuse block |
4 | Charging Cut-off Voltage | 168V | Shutdown |
5 | Discharge Protection Voltage | 102V | Shutdown |
6 | Cooling Method | Natural cooling | |
7 | CAN bus | Option | |
8 | GPS/GPRS | Option |
Test Type | Test Method | Result |
Temperature and Humidity | Expose a fully charged capacitor to 40±2°C, and 90% - 95% RH for 240±48 hours. Measure changes in capacity and ESR | ΔC/C ≤ 20% ESR ≤ 1.5X |
Overcharge | Charge a fully charged capacitor at 1C for 1 hour until cell voltage reaches 1.5U | No fire hazard |
Over Discharge | Discharge a fully charged capacitor at 1C for 90 minutes | No fire hazard |
Short-Circuit | Connect positive and negative terminal of a fully charged cell for 10 minutes | No fire hazard Tmax. ≤ 150°C |
Thermal | Heat a fully charged capacitor to 130±2°C for 30 minutes in a convection over with ΔT=5±2°C/minute | No fire hazard Tmax. ≤ 200°C |
Vibration | Subject a fully charged capacitor to 3-dimensional vibration for 30 minutes per axis. Vibration frequency change at 1Hz/minute, frequency range = 10 to 55Hz, vibration displacement = 1.6mm | No fire hazard |
Drop | A fully charged capacitor is dropped twice from an altitude of 1.5 meters onto concrete floor | No fire hazard |
Nail Penetration | Puncture a fully charged capacitor with a stainless-steel nail across the midsection | No fire hazard |
Crush | Crush a fully charged capacitor vertically with a force of 200kN until the cell ruptures causing an internal short-circuit (voltage = 0V) | No fire hazard |