China Light Keel Roll Forming Machine, Find details about China Light Keel Roll Forming Machine, Metal Sheet Roll Forming Machine from Light Keel Roll Forming Machine
china manufacturer
Main parameter of Xinnuo stud and track roll forming machine
Technical parameters: | ||
1 | Name of commodity & specification | Stud and track roll forming machine |
2 | Main motor power | 3kw, 3 phase |
3 | Hydraulic motor power | 3kw |
4 | Hydraulic Pressure | 10-12MPa |
5 | Voltage | 380V /3phase/ 50 HZ (or as your requirement) |
6 | Control System | PLC Delta Inverter |
7 | Main Frame | 300mm H-Beam |
8 | Backboard Thickness | 14mm |
9 | Chain Size | 20mm |
10 | Feeding Material | color steel coils |
11 | Feeding Thickness | 0.3-1.2mm |
12 | Productivity | 8-12m/min |
13 | Roll Station | 11 |
14 | Roller Diameter | 70mm |
15 | Roller material | 45# steel |
16 | Cutter material | Cr12 , quenched |
17 | Cr-Plating Size | 0.05mm |
18 | Overall Size | 3000×800×1000mm |
19 | Total Weight | 2T |
20 | Components | Manual Uncoiler-------------------1 set Guiding Platform------------------1 set Coil Strip Leveler------------------1 set Main Machine of Roll Forming------1 set Electric-Motor---------------------1 set Cutting Device--------------------1 set Hydraulic Station------------------1 set PLC Control-----------------------1 set Supporter Table-------------------1 set |
Equipment components: Manual uncoiler, Roll forming machine, computer control system, hydraulic control system, cutting, run out table
the picture of the stud and track roll forming machine
Main machine is nude, the computer control box is packed with wooden fram
1.Does one roll forming machine can only produce one size?
A.Not exactly, it depends on the machine.
2.Do you have after sales support?
A.Yes, we are happy to give advice and also have skilled technicians available to maintain the machine if needed.
3.What can you do if the roll forming machine broken?
A.Xinnuo roll forming machine's warranty period is 12months. if the broken parts can't repair, we can send the new parts replace the broken parts,
but you need pay the express cost by yourself. if after warranty period, we can through negotiation for solving the problems, and
we supply the technical support for the whole life of the equipment.
4.Can you be responsible for transport?
A.Yes, please tell us the destination port or address. we have rich experience in transport.
5.You are trade company or factory?
A.We are factory.We can always send you a video or live broadcast to prove that we are a factory/you can also send us a link to the VR real scene of our factory.
6.Do you provide customized?
A.Sure, we can design the equipment according to the data of the structural section you provide. We are professional sheet metal forming machine designer and manufacturer.