CJBK20-630 -24kV 630A Dead Break Screened Separable Rear Tee Connector with Mechanical Lug (Interface C1)Interface C1 bushing (630A) CJB20-630 and CJBK20-630 are made of silicone rubber, applicable for connecting with type C1 bushing as described by CENELEC EN 50180, 50181 and DIN 47636. CJB20-630 The screened separable tee connector CJB20-630 is designed for connecting the polymeric cable to transformers, switchgears and other equipment. CJBK20-630 The screened separable connector CJBK20-630 is application for dual cable arrangement, designed to be used with CJB20-630 screened separable tee connectors. Key Clients Design
Type C1 bushing
• Stud + nut + washers
• Insulating back plug (with test point is available)
• Cable lug (compression and mechenical type are available)
• Inner screen layer
• Insulation layer
• Outer screen layer
• Stress cone
• arthing wire
• Cable core
• B type connecting rod
Specification Kit reference | Suit for diameter over XLPE insulation | Conductor size (17.5kV) | Conductor size (24kV) |
CJB20-630-1#, CJBK20-630-1# | 16.5-23 mm | 35-95 sq.mm | 25-70 sq.mm |
CJB20-630-2#, CJBK20-630-2# | 23-28 mm | 120-185 sq.mm | 95-150 sq.mm |
CJB20-630-3#, CJBK20-630-3# | 28-36 mm | 240-400 sq.mm | 185-300 sq.mm |
CJB20-630-4#, CJBK20-630-4# | 36-40 mm | 500 sq.mm | 400-500 sq.mm |
CJB20-630-5#, CJBK20-630-5# | 40-45 mm | 630 sq.mm | 630 sq.mm |
Technical data Test Item | Test value |
AC voltage withstand | 54kV, 5min |
AC voltage withstand | 30kV, 15min |
Partial discharge | 20kV, ≤10pC |
Heating cycles voltage test | 30 cycles in air, 30 cycles under water at 95-100°C, 30kV |
Thundering impulse voltage withstand | 125kV at 10 positive and 10 negative |
Screen resistance | Not exceed 5000Ω |
Screen leakage current | Maximum 0.5mA at 24kV |
Thermal short-circuit test | No visible deterioration at 37.3kA, 2s |
Dynamic short-circuit test | No visible deterioration at 131.9kA, 10ms |
Type test was performed in Guangdong Testing Institute of Product Quality Supervision (GQI), which is accredited in accordance with ISO/IEC
17025 General Requirements for the Competence of Testing and Calibration Laboratories. Type test reference standard: IEC60502-4:2005.
Main components Applications