Products

Isuzu 600p 5 Ton Fire Truck

China Isuzu 600p 5 Ton Fire Truck, Find details about China Water Fire Fighting Truck, Fire Truck from Isuzu 600p 5 Ton Fire Truck

Fuel
Diesel
Drive Wheel
4×2
Horsepower
＜150hp
Condition
New
Trademark
ISUZU
Transport Package
Nude
Specification
6360× 2000× 2740mm
Origin
China
HS Code
8503009090
Fuel
Diesel
Drive Wheel
4×2
Horsepower
＜150hp
Condition
New
Trademark
ISUZU
Transport Package
Nude
Specification
6360× 2000× 2740mm
Origin
China
HS Code
8503009090

ISUZU 600P 5 ton fire truck is adapted from Isuzu 600P series chassis of Qingling Motor Co., Ltd., the original double-row seat 4 door cab, the number of occupants is 2+3, the power is Isuzu 130 horsepower engine, the actual volume of the tank is 4 Cubic meters (5 tons), equipped with domestic well-known brands CB10/20 fire pumps, PS20 fire water cannons, with a range of more than 45 meters, is the first choice for combat fire fighting models in towns, communities, enterprises, factories, shopping malls.

Product Specifications:



Isuzu 5 tons water tank fire truck (600P)parameter configuration
Chassis modelQL1070A5HWYengine modelIsuzu 130hp/96KW
Outside dimensions6360×2000×2740mmWheelbase3360mm
Carrier volume1980~2500LEmission StandardsCountry Five (Country V)
Fire PumpCB10/20Fire cannonPS20W
Fire pump rated flow20L/s 1.0MPaEnvironmental protection/exemptionThere is environmental protection / declaration
Rated flow of fire monitor20L/s 1.0MPaFire gun rangeWater ≥48m
Special functionLiquid tankCarrier volume4 cubic meters (announcement 3.38 square meters)
MaterialCarbon steel ( stainless steel or PP material can be selected as required )
Tank fixingFlexible connection with chassis frame
Manhole1 DN460 manhole with quick lock/open device
Water inletThere is a DN65 interface on the left and right sides of the water tank
Inlet and outlet1 water tank to the water inlet pipe of the pump, DN100 valve, manual control
1 water pump to the water tank filling pipe, DN65 valve, manual control
Drain1 DN40 water tank to put the remaining water port, with manual control of ball valve
Overflow1 DN65 overflow port
Fire PumpmodelCB10/30 type low-pressure vehicle fire pump
formAtmospheric centrifugal
Installation locationRear
flow30L/s @1.0MPa
Outlet pressure1.0MPa
Maximum suction depth7m
Water diversion deviceBuilt-in sliding vane pump
Diversion timeMaximum suction depth≤35s
Fire cannonmodelPS30W
flow30L/s
Rotation angle360° horizontal rotation
Range≥55m
Maximum elevation/depression angleElevation angle ≥+60° Depression angle≤-15°
Power take-off and transmission systemstructure typeSandwich mechanical transmission
Clutch methodHand control
Lubrication methodSplash lubrication
Transmission systemCross shaft universal joint drive shaft
Pipeline systemPipe materialHigh-quality seamless steel pipe
Suction pipeThere is a DN100 suction port on the back side of the pump room
Water injection lineThere is a DN65 water injection port on the left and right sides of the water tank, and a DN65 water
pump is installed in the pump room to inject water into the tank
Outlet pipeThere is a DN80 water outlet on the left and right sides of the pump room, with a shut-off valve and a cover
Cooling water pipelineCooling water pipeline and control valve with cooling power take-off
Electrical EquipmentFireplace lighting1 35W fire searchlight installed at the rear
Strobe lightInstall red and blue strobe lights on both sides of the body
Warning deviceInstall a long row of red warning lights on the top of the cab
SirenThe control box is in front of the driver's cab
Auxiliary lightingFiremen's room, pump room and equipment box are equipped with lights, and the control dashboard is equipped with bright and indicator lights
Additional electricalSet up an independent circuit
Ladder and handleLadderAluminum alloy two-section flip ladder, when used, it should not exceed 450mm from the ground,
Get on the carAdopt anti-skid round steel pipe with groove on the surface, sprayed on the surface
Equipment box and pump roomstructureThe main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate.
Equipment boxThe equipment box is located at the rear of the passenger compartment. The aluminum alloy rolling doors on both sides are equipped with lighting lamps. The equipment room is equipped with storage boxes according to needs.
Pump roomThe pump room is located at the rear of the vehicle, with aluminum alloy rolling doors on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room



Isuzu 600p 5 Ton Fire Truck
Isuzu 600p 5 Ton Fire Truck
Isuzu 600p 5 Ton Fire Truck
Isuzu 600p 5 Ton Fire Truck
Isuzu 600p 5 Ton Fire Truck


Customer visit:

Isuzu 600p 5 Ton Fire Truck
Isuzu 600p 5 Ton Fire Truck
FAQ 3: How about the after sale service?
        A: First we choose the popular brand in local market with after sale service. Second, we can delivery spare parts 
            and engineers to your place. Make maintenance plan and provide commissioning service.
FAQ 4: How about gurantee and warranty?
        A: We provide 16 years spare parts service for exporting vehicles, warranty one year from B/L date.
            Warranty of special model vehicle will be negotiated.
 

You Might Also Like