Products

Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System

China Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System, Find details about China Cutting Table Smoke Exhaustor, Plasma Fume Extractor from Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System

Model NO.
WLC-16YT
Model
Wlc-16yt
Air Volume
16000m3/H
Model of Dedusting
Automatic Dedusting
Engine Power
18.5kw
Air Intake Dimension
Diameter 600
Location
Indoor
Net Weight
1900kg
Ash Bucket Capacity
162L
Filter Efficiency
99.99%
Compressed Air Requirement
0.5~0.6MPa
Trademark
Welldone
Transport Package
Ply Wooden Bases/Paper Box/Wooden Box
Specification
1550mm*1690mm*2870mm
Origin
Changsha, China
HS Code
8421392990
Model NO.
WLC-16YT
Model
Wlc-16yt
Air Volume
16000m3/H
Model of Dedusting
Automatic Dedusting
Engine Power
18.5kw
Air Intake Dimension
Diameter 600
Location
Indoor
Net Weight
1900kg
Ash Bucket Capacity
162L
Filter Efficiency
99.99%
Compressed Air Requirement
0.5~0.6MPa
Trademark
Welldone
Transport Package
Ply Wooden Bases/Paper Box/Wooden Box
Specification
1550mm*1690mm*2870mm
Origin
Changsha, China
HS Code
8421392990
Downdraft plasma cutting table smoke exhaustor dust collector system
Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System
Part 1: cutting table smoke exhaustor application
Plasma cutting is different from Welding or laser cutting. It have more fume during working. Choosing one good quality dust collector is very meaningful.  Welldone can offer the most effective solution according to the working condition, and decrease the plasma fume damage to production.

Part 2: Techinical discription
The side suction type dust remover system for gantry cutting machine is mostly used in pPlasma table fume extractor.  Add one suction air tube and suction air mouth on one side of the cutting table, the other side fixed blow air devices; Or add tube sand suction air mouths on each side of the cutting table. The suction air mouth can move with the cutting head. When the cutting nozzle working, the fume can be sucked through the suction air mouth. The sealed belt is used to make sure no fume spread.  When the suction nozzle moved, the wheel move with it will open the suction air mouth. The fume been collected to the dust collector.
Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System


Part 3: WLC series machine feature

Plasma cutter fume extractor includes fan, generator and filter unit which is compact structure, smaller floor area, low noise processing equipment. It fully combined with the user's long-term use of feedback, new design patents which make site use and maintenance more convenient and humane.
Exterior design
Industrial esthetics design, the overall incline of the hard design style. The strong sense of military-style appearance shows the good quality and rigorous process of the equipment. The whole of the light color system makes the vision more clear, and it eliminates the dull and depressing that the mechanical equipment brings, it is more friendly of the man-machine operation.
Engine block structure
All structures are made of high quality cold-rolled steel plate, and the laser cutting is used to press the forming process. The structure design is reasonable, compact and durable. The body adopt corrosion resistant spray treatment, it can be used in all kinds of harsh environment, and it is durable. In the case of potential fire hazard, the spark catcher can be installed to prevent the spark from entering the inside of the device.
Filter unit
The dust deflector can be used to protect the air flow and the filter core from the damage of large particles. The filter unit adopts the vertical cover type filter core to quickly install the method to facilitate the removal and maintenance of the filter core The filter unit adopts the quick installation that is vertical end cover type filter. It can be more easier to install and maintain. Vertical filter core make cleaning the ash more thoroughly. The filter core has larger filtration area, lower wind speed and longer life. The filter element adopts imported polyester coated filter material with good air permeability and 99.9% filtration precision that can meet emission requirement.
Fan unit
Fan impeller: the blade and wheel cap is formed integrally through pressing. It is precision positioning, high performance of aerodynamics, high efficiency, low noise and stable performance. Balance level<=4.0(National standard).
Imported motor:
The energy consumption and the rate of the heating is 10% lower than the domestic motors at the same condition. It is low noise with the inner muffler when it working. The min. noise can reach 65db. The noise of different power filters is slightly different.
Control system
The outside hanging design of the control system can be installed according to the requirements of the operating environment of the equipment. The installation position is more flexible, which reduces the pollution of the internal dust to the electrical components and extends the service life. The control system adopts PLC automatic control. According to the difference working condition, our professional engineers can specifically run the program.

Part 4: Techical parameter of Downdraft plasma cutting table smoke exhaustor, dust collector system
ModeWLC-16YT
Voltage/Phase/frequency380V/3PH/50HZ
Air volume16000m³/h
Engine power18.5kw
Filter efficiency99.99%
Filter 16-Φ324*860mm
Anti-blow valve quantity16
Ash bucket capacity162L
dB<85db
Compressed air requirement0.5-0.6MPa
Outside demension1980*1690*2870mm
Air intake demensionΦ600mm
OptionAnti-explosion
OptionFrequency conversion
OptionWireless remote control

Part 5: Application cases pictures
Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System
Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System
Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System

Part 6:  Why choose Welldone? 
1.Patent design,  CE, ISO9001, ISO14001, and OHSAS18001 certificate approved.
2.Fine details design, like 2-3mm thickness metal, 80mm noise damping cutton...
3.Advanced patent design filter,  0.02-99.9% efficiency,  8000h lifetime. PTFE coated, Import from Japan. easy pass government inspection
4.Famous machine components.
5.3 years warranty on fan and motor, 1 years warranty on filter
6. Manufacture directly sales, lower price, better services and easy maintance.
.......

Part 7:  Company introduction
Downdraft Plasma Cutting Table Smoke Exhaustor Dust Collector System


Quickly contact us if you are interested in our products:
Tel: +86 0731-86398162
 
Welldone Environmental Protection Equipment (Changsha) Co., Ltd
Website: welldoneexport.en.made-in-china.com
 

You Might Also Like