Interior Foam Sandwich Wall Panel Low Density Structural Insulated Panels

What is ZJT eps cement sandwich panel

Surface :fiber cement board/calcium silicate board
Interior filling materials: EPS / cement / fly ash / sand / additive               

Advantages 

1.Energy Saving, Excellent Performance
Heat Preservation: Major material for wall panel is anti-freezing, heat preserving and environmental friendly.
Heat Insulation: Adjust the indoor temperature at a constant range.
Fire Proof: Both face sides with 5mm calcium-silicon fire proof board, thus Eps and Cement sandwich panel can be against a high temperature of 1000°C for 4 hours. 
Water Proof: Tests has proved that water containers can be made by Eps and Cement sandwich panel without absorbing functions and no leakage at all.  
Sound Insulation: The inside of wall panel material (EPS polystyrene grain) has fine sound insulation and sound-absorbing functions.
 
2. Space and Cost Saving
Space Saving: Eps and Cement sandwich wall panel with the thickness of 60mm-180mm, as a thin and solid new type construction material, it will save a lot of construction space compared with the traditional block. 
Labor Cost Saving: As wall panel is easy and fast to construct. 
Foundation Cost Saving: As the weight of wall panel is only 1/12 of traditional block, it will save 2/3 cost on construction structure.
 
3. Easy Construction Process
Easy to Install: Using our installation material (EPS Foam and Cement Adhesive) is easy to build house.       
Shorter Time: For a 50sq. house, using Eps and Cement sandwich wall panel, three people can finish it within ONE day, while using traditional block, it will take at least SEVEN days with ONE WEEK to finish.
 
4. High Security performance
High Intension: Eps and Cement sandwich wall panel can be nailed directly or have expansion bolt to lift and hang heavies, it can be covered by ceramic tile, wall paper, wood panel, coating etc. 
Earthquake Resistance: The Seismic performance of DQ Eps and Cement sandwich wall panel is at a magnitude of 7.0.

Specification and Application

Application: residential building,school,hospital,villa,hotel,public construction,prefab house,shopping mall.                    
Other Application: super high wall,abnormity wall,pipe,fire well,equipment partiton

1).Inner wall system

2).Outer wall system



3).Roof system

4).Floor system


Installation

1. Setting the line and carrying the board into position.
2. Using a hand-hold electric saw cut to the sizes needed.
3. Sizing cement on tenon side of two boards, then spread specific mortar on one tenon side casually.
4. Carrying the board prepared to be installed to the installation place, correcting the wall board by special tools, and making it close tightly. Then let the specific mortar squeeze out into full and then fixing it with a wedge temporarily.
5. Planting bars in wall and pillar: drill a hole in the original pillar or wall, and fix the board by steel bars
6. Correcting and fixing: Using a guiding rule to check the vertical and leveling correction.
7.Planting bars in structure beam: drill a hole in structure beam and plant a reversed 7-shaped steel bar to fix with wall board.
8. Planting bars in floor: drill a hole in the floor and plant a 7-shaped steel bar to fix with wall board.
9. Planting bars between two boards, plant a steel bar in the angle of 45 degree to fix.
10. Installing electrical wires and switches: setting lines on the places needing to be set with concealed wire and switch box.
11. Grouting and filling starch: filling and sticking the corrected wall board with polymer mortar.
12. Sticking anti-cracking tape. After the mortar and wall are all shaped, sticking glass-cloth or anti-cracking tape, brushing coating.
 

Packaging
Plastic wrap+packing belt+ pallet
 

XIAMEN ZHONGJIGNTAI BUILDING MATERIALS CO.,LTD

Adress:   Unit 2A, Lianchang Building, NO.6-8 Huli Avenue, Huli District, Xiamen, China
Website: http:// zjteps.en.made-in-china.com 
 

ZJT Factory
          

Contact Us