24ge+4 10g SFP Plus L2 10gigabit Ethernet Switch

China 24ge+4 10g SFP Plus L2 10gigabit Ethernet Switch, Find details and Price about China 10g Switch, 10g Network Switch from 24ge+4 10g SFP Plus L2 10gigabit Ethernet Switch

Model NO.
S5128G-4SE
Trademark
PHYNAM
Origin
Dongguan Guangdong China
HS Code
85176219
Model NO.
S5128G-4SE
Trademark
PHYNAM
Origin
Dongguan Guangdong China
HS Code
85176219
S5128G-4SE 10Gigabit Ethernet Switch
 
 Product Overview

10Gigabit Data Center Switch S5128G-4SE is a layer 2 non-blocking switch with Broadcom chip. Providing 128Gbpsswitching capacity, with 95.232Mpps forwarding performance, L2 / L3 full wire-speed forwarding. Its flexible networking capability ensures the stability of the network and the balance of the load link. With the modular design, it provides 24*10/100/1000M RJ45 ports,4* 10G SFP+ optical ports, 1 Console port, which offers enough bandwidth for data aggregation and data exchange. With high bandwidth and low latency, pipe network.And in order to flexibly respond to the network requirements, users can select appropriate, 10G ports according to their needs. L2 S5128G-4SE  is located in high-density access to the core data and the cloud computer network in the next generation, and this product also can be applied for the core and the aggregation of large Internet cafes, enterprise network and metropolitan area network.

Product Feature
Remarkable Performance
1.With 128Gbps backplane capacity, the industry the highest performance (1U TOR);
2. Hardware routing, the packet forwarding rate of the wire speed layer 3 switching has reached 95.232Mpps, L2 / L3 full speed forwarding;
3. Able to be deployed in the Metropolitan Area Network and provide several last kilometer technology

Safe and Reliable
1. Provide DOS, DDOS, spoofing and virus defense;
2. Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and policy control technology;
3.Restrict the maximum number of  hosts connected with the port, multi-binding Ethernet interface , increasing bandwidth and system redundancy;

4. Powerful ACL, support L2-L4 data filtering;
5. Policy control list and flow regulation.
Convenient Maintenance   
1.Able to be managed via Web, SNMP, CLI, telnet, etc;  

2.Support XModem protocol, use TFTP/ZMODEM for software upgrading and BootRom upgrading;
3.Support SFP+, simultaneously downward compatible XFP;

4. Support flexible port configuration;
5.Enter or exit low-power condition from PHY.
Powerful Flow and Broadcast Management  
1.Automatically detect and control broadcast storm, support IGMP packets detection, effectively limit the flooding of broadcast packets;
2. Support Ethernet interface taking 1M as the step length for rate limiting.
3. Support full duplex mode and half duplex mode flow control;

4. Support IP multicast and QoS
 
Product's Technical Parameters
Product ModelL2 S5128G-4SE
Basic Featrue
Fixed Port4*10G SFP+ optical ports,
24* 10/100/1000M RJ45 adaptive RJ45 ports
Console Port1
Backplane Capacity128Gbps
Packet Forwarding Rate 95.232Mpps
Jumbo Frames12k bytes
Chip BCM
LayerL2
Transfer ModeSupport store-forward mode and cut-through mode
CPUARM® Cortex™-A9
MAC Address Table16K
Packet Buffer1.5MB
VLAN ID4K
Flash Memory Capacity8MB
Memory Capacity256M
Soft Specification
Security FeatureIP+MAC+PORT+VLAN binding
ARP inspection
DOS prevention
Port protection
IP source port protection
VLANPort based VLAN
802.1Q VLAN
IP based VLAN
MAC based VLAN
MAC Address TableStatic MAC address table
Dynamic MAC address table
Storm ControlBroadcast suppression
Multicast suppression
DLF suppression
Limiting rate
Flow ControlHalf-duplex control based on the back pressure type
Full-duplex control based on the PAUSE frame
Port MirroringSupport port mirroring
Port ManagementGeneral setting
Port counting
Configuring port
Port Trunking(Static link aggregation)
Port-isolation
QoSIEEE 802.1Qau Congestion mechanism
Each port has 8 transmitting queues mapping 802.1p 8 priority
IP ServicesPing detection
DHCP Snooping
Spanning Tree MSTP(802.1s),STP,RSTP
Multicast ManagementIGMP Snooping multicasting packets detection
System ManagementSupport SNMP v1/v2
Support Console
Support TELNET
Support WEB interface
Remote UpgradingSupport version upgrading via web
Support version upgrading via local
Physical Characteristics
Dimension440x230x44mm
Characteristic of Power AC: 110V~260V
Power≤80W
Indicator Power indicator, system indicator, connecting / transceiver indicator
Environment Temperature /
Humidity  
operating temperature: 0°C~50°C (0m~1800m) storage temperature: -40°C~+70°C, relative humidity: 5%RH~95%RH, Non-condensing
 24ge+4 10g SFP Plus L2 10gigabit Ethernet Switch
 24ge+4 10g SFP Plus L2 10gigabit Ethernet Switch