Cast Iron Stop Valve (Hard Seal)

China Cast Iron Stop Valve (Hard Seal), Find details about China Angle Valve, Knife Valve from Cast Iron Stop Valve (Hard Seal)

Model NO.
J11F-16KD
Service
OEM/ODM
Model NO.
J11F-16KD
Service
OEM/ODM
Cast Iron Stop Valve (Hard Seal)
Size15
(1/2")
20
(3/4")
25
(1")
32
(11/4")
40
(11/2")
50
(2")
L(mm)90100120140170200
H(mm)110120135160165170
φD(mm)626585100100115
 

Parts Name

Body

Bonnet

Disc

Stem

Seat

Sealing Ring

Packing

Hand wheel

Materials

Malleable Cast Iron

Brass

Tefion

Graphite

Cast Iron
 
Main technique number
Design Standard:CJ216- -2005 BS5163
Face To Face:BS5163/ISO5752 3 Series
End Flange:BS4504/BS EN 1092
Test:EN1074
Test Pressure Mpa
Dody:2.4/1.5
Seat:1.76/1.1
Usable Mediums:Fresh water, air or other gas, oil, ternperature is not higher than 70ºC
 
Cast Iron Stop Valve (Hard Seal)
 
Introduction of soft sealing gate valve flange
A Traditional valve intracavity a cavity at the bottom, making it easy for debris deposition, and could not shut down close, resulting in leakage of the valve
formation at the bottom, it is not easy plot debris, fluid unimpeded, switching easily.
B Ram EPDM rubber-coated surface are selected materials used meet the health standards gB/T17219-1998, without any water or rust corrosion
phenomenon for Health drink And connecting with the ram Solid, not good memory loss and flexibility. Seal reliable, anti-wear, leakage rate of zero.
C Valve internal and external use nontoxic coating resins, resin meet sanitary conditions, and enhance decay resistance capacity, eliminating the secondary
pollution on the water quality.
D Stem nut embedded gate, so that it will not loosen or vulnerable to corrosion, long service life.
E. The seal design uses threeo'-rings can be kept water replacement, maintenance, maintenance.
 
 
Cast Iron Stop Valve (Hard Seal)
Cast Iron Stop Valve (Hard Seal)
Cast Iron Stop Valve (Hard Seal)
Cast Iron Stop Valve (Hard Seal)