Basic Info.

Model NO.

J41T(H)-16

Service

OEM/ODM

Model NO.

J41T(H)-16

Service

OEM/ODM

Product Desciption

Size	15 (1/2")	20 (3/4")	25 (1")	32 (11/4")	40 (11/4")	50 (2")	65 (21/2")	80 (3")	100 (4")	125 (5")	150 (6")	200 (8")
L(mm)	130	150	160	180	200	230	290	310	350	400	480	600
H(mm)	112	124	140	172	180	195	224	366	390	437	472	545
D(mm)	φ62	φ65	φ85	φ100	φ110	φ145	φ165	φ200	φ240	φ240	φ280	φ320

 

Parts Name	Body	Bonnet	Disc	Stem	Packing	Hand Wheel
Materials	Gray Cast Iron		1/2"-2"Brass 21/2"-" Gray Cast Iron 304Stainless Steel	1/2"-21/2": Brass 3"-8":45#	Graphite	Cast Iron

Product Standards:GB/T12233-2006
Flange Standards:GB/T17241.6-2008
 

Main technique number
Design Standard:CJ216- -2005 BS5163
Face To Face:BS5163/ISO5752 3 Series
End Flange:BS4504/BS EN 1092
Test:EN1074
Test Pressure Mpa
Dody:2.4/1.5
Seat:1.76/1.1
Usable Mediums:Fresh water, air or other gas, oil, ternperature is not higher than 70ºC
 

 

Introduction of soft sealing gate valve flange

A Traditional valve intracavity a cavity at the bottom, making it easy for debris deposition, and could not shut down close, resulting in leakage of the valve
formation at the bottom, it is not easy plot debris, fluid unimpeded, switching easily.
B Ram EPDM rubber-coated surface are selected materials used meet the health standards gB/T17219-1998, without any water or rust corrosion
phenomenon for Health drink And connecting with the ram Solid, not good memory loss and flexibility. Seal reliable, anti-wear, leakage rate of zero.
C Valve internal and external use nontoxic coating resins, resin meet sanitary conditions, and enhance decay resistance capacity, eliminating the secondary
pollution on the water quality.
D Stem nut embedded gate, so that it will not loosen or vulnerable to corrosion, long service life.
E. The seal design uses three o'-rings can be kept water replacement, maintenance, maintenance.