Products

Construction Material AR/ARG Glass Fibre Mesh

China Construction Material AR/ARG Glass Fibre Mesh, Find details about China Arg Glassfibre Mesh, Fiberglass Mesh from Construction Material AR/ARG Glass Fibre Mesh

Model NO.
ARNP5*5-100LH 160G/M2 ZRO2 16.7%
Trademark
Huierjie
Specification
ARNP5*5-100LH 160G/M2 ZRO2 16.7%
Origin
China
HS Code
70193990
Model NO.
ARNP5*5-100LH 160G/M2 ZRO2 16.7%
Trademark
Huierjie
Specification
ARNP5*5-100LH 160G/M2 ZRO2 16.7%
Origin
China
HS Code
70193990
Construction Material AR/ARG Glass Fibre Mesh 


Application:
HUIERJIE AR GLASSFIBRE MAT is available in a range of nominal weight: standard is 150g/M2. It is produced by chopping Huierjie AR-Roving into 20-50mm strands and forming into a mat with a suitable binder. The mat has an open construction to permit penetration by cement mortar. The engineered binder, which dissolves with water further, assists incorporation into a cement matrix.
(1) It is used for layout, coating or mechanical formed GRC.
(2) It is used in roof waterproof and gypsum\marble\mosaic or board reinforcement.
(3)Reinforced material of internal and external insulation system of wall. Especially for External Thermal Insulation Composite Systems (ETICS). It can reinforce wall and prevent cracks. It is an ideal engineering material in construction.


HUIERJIE AR GLASSFIBRE MAT may be used as a positioned reinforcement flooring systems
AR MAT  FOR GRCAR MESH FOR GRC
ARMC150-1000L(H)
ARMC225-1000L(H)
ARMC300-1000L(H)		ARNP10*10-100L(H)-160G/M2
ARNP5*5-100L(H)-160G/M2
ARNP6*6-100L(H)- 270G/M2
 
MAT Technical Data
  • EXAMPLE                                                    ARMC150-1000H
  • Type of glass                           Alkali Resistant       (AR)       
  • Zirconia (ZrO2) content                     ≥16.7%
  • Filament diameter (μm)               11+2 
  • Strand tex                          50+5
  • Weight      available(g/m2)                              150 225 300                          
  • WIDTH(MM)                                                 1000
  • Sizing Content                                  9%
  • Breaking strength(N/150MM)               37
 
MESH Technical Data
  • EXAMPLE                                                             ARNP5*5-100-160G/M2
  • ]Type of glass                                          Alkali Resistant       (AR)       
  • Zirconia (ZrO2) content                             ≥16.7%
  • Hole Distance(mm)                                               5                                                      
  • Weight      available(g/m2)                                      145 160  270                          
  • WIDTH(MM)                                                         1000
  • WARP DIRECTION TENSILE STRENGTH  (N/50mm)       1356       
  • WEFT DIRECTION TENSILE STRENGTH  (N/50mm)        1290    
  • LATEX COATING Content                    20%
  • Strength Remained rate after soaked in
cement filtrate for 28 days                               ≥90%
  • Breaking Elongation                                               ≤5.0
MAT Packing details: 100M2 /Roll /ctn,16ctns/pallet,20pallets/1*20'FCL. 32000m2.
 
MESH Packing details: 50M2/Roll, 36rolls/pallet, 20pallets/1*20'FCL. 36000m2.
 
Properties:
Good stableness, Good cohesion with concret, High strength, elastic modulus up to 80.4Gpa, High alkali resistant, Strain breaking point: 2.4%

Storage
Huierjie AR Glassfibre mat & mesh pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15ºC- 35ºC & relative humidity between 35%- 65%.If stored below 15ºC, it is advisable to hold in workshop for 24 hours to prevent condensation before use.
 
Note:
Huierjie AR Glassfibre mesh are manufactured in compliance with EN15422:2008, BSEN13496:2002 and ETAG 004.
 
HUIERJIE AR GLASSFIBRE MESH is used by Manual laying or Mechanical molding to reinforce the areas which need mechanical strength to prevent crack.

You Might Also Like