Bronze Stainless Carbon Steel Ceramic Coating Doctor Blade
China Bronze Stainless Carbon Steel Ceramic Coating Doctor Blade, Find details about China Ceramic Coating Blade, Coating Doctor Blade from Bronze Stainless Carbon Steel Ceramic Coating Doctor Blade
SUN HONG Sprayed ceramic coating has the best performance and wear-resistance for the high-end product.
The product range can meet almost all requirements of applications and performance in the market.
First-class equipment and production technology can ensure a stable and lasting good performance of the high-precision stick.
SUN HONG coating blade has been used in different paper and paper machine,proved that ours coating blade can improve equipment performance and paper quality, thereby improving productivity.
smooth ceramic surface
superior ceramic coating technology
superior wear-resistance
Advantages
increase production capacity
long service life
uniform coating layer
The following table shows the different types of blade wear and the corresponding treatment methods. This inspection method is very effective.
| Problem | Reason | Measure |
| Uneven wear, frequent blade replacement | 1. The surface of roller or dryer is uneven 2. The doctor holder is damaged or dirty 3. Sediment | 1. Use a softer blade 2. Clean, repair or replace the doctor holder 3. Use abrasive blade |
| Excessive wear on middle or edge of blade | 1. The blade is not installed on the top of the roller 2. The old blade sinks (or leaves) the roller or dryer | 1. Refit or add gasket at the back of blade if necessary 2. Replace the old and sunken blade |
| Excessive wear at one end of blade | The displacement of blade is not parallel to the axial direction of roller or dryer | Add gasket, if necessary, move bearing and bracket to adjust scraper parallel to axial direction |
| The blade is worn evenly, but the end face is rough | 1. There is deposit on the surface of roller or dryer 2. The pressure of blade is too high 3. The material of blade is too hard | 1. Use abrasive blade when necessary 2. Reduce the pressure 3. Use a slightly soft blade |
| Excessive wear in sheet area | The sheet leaves sediment on the roller or dryer | 1. Use abrasive blade when necessary 2. Trim the edge of blade frequently 3. Use blade with slotted end to prevent excessive pressure on both ends of roller or dryer |
| Excessive wear out of sheet area | The sheet lubricates the roller or dryer | Use blade with slotted end |
| Local depression | The blade is damaged, electrostatic (discharge/ electrolysis /heating) | Insulate the blade from the holder or use a non-metallic blade |
| The blade produces burr | 1.The material of the blade is too soft 2. The pressure is too high 3. The angle of the blade is too small | 1. Use a slightly hard scraper 2. Reduce the pressure 3. Adjust the bearing or bracket to increase the angle, and use the instrument to check and correct the angle |
Width and Thickness index
The width and thickness of the coating blade is suitable for all paper machine models.
Width:Max. 100mm(4" )
Standard thickness : 0.254,0.305,0.381,0.457,0.508,0.635.
Mode of supply:
According to your order request supply it in roll or cut to length The finished blade can be single packaged or multiply combinations.
Bubble film with cardboard box or wooden box by air or by sea
SUN HONG as a professional manufacturer of all kinds of soft packaging and printing paper making doctor blade.
We own professional technical staff, which provide you a full range of solutions in packaging and printing industry related technology equipment for customers.
Our company will stick on good faith principle, pragmatic attitude, to provide high-quality products and service for the domestic printing industry.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover